TurnKey Linux Virtual Appliance Library

Turnkey Linux File Server 12.0 cant detect my dell server em0

Hi everyone,

 

I downloaded Turnkey Linux File Server 12.0 iso and succesfully installed it but it cant detect my netowrk interfaces. When i installed centos before, it appeared as em0 until em3. My server is Dell R710.

This my dmesg

TQ

 

 

 

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:01:19 UTC 2012
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cf379000 (usable)
[    0.000000]  BIOS-e820: 00000000cf379000 - 00000000cf38f000 (reserved)
[    0.000000]  BIOS-e820: 00000000cf38f000 - 00000000cf3ce000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cf3ce000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[    0.000000] DMI 2.6 present.
[    0.000000] last_pfn = 0xcf379 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CBFFF write-protect
[    0.000000]   CC000-D3FFF write-back
[    0.000000]   D4000-EBFFF uncachable
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0080000000 mask FFC0000000 write-back
[    0.000000]   2 base 00C0000000 mask FFF0000000 write-back
[    0.000000]   3 base 0100000000 mask FF00000000 write-back
[    0.000000]   4 base 0200000000 mask FFE0000000 write-back
[    0.000000]   5 base 0220000000 mask FFF0000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037000000 page 2M
[    0.000000]  0037000000 - 00373fe000 page 4k
[    0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[    0.000000] RAMDISK: 7f6f7000 - 7ffff235
[    0.000000] Allocated new RAMDISK: 00100000 - 00a08235
[    0.000000] Move RAMDISK from 000000007f6f7000 - 000000007ffff234 to 00100000 - 00a08234
[    0.000000] ACPI: RSDP 000f1150 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 000f1254 0009C (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: FACP cf3b3f9c 000F4 (v03 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: DSDT cf38f000 03DD0 (v01 DELL   PE_SC3   00000001 INTL 20050624)
[    0.000000] ACPI: FACS cf3b6000 00040
[    0.000000] ACPI: APIC cf3b3478 0015E (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: SPCR cf3b35d8 00050 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: HPET cf3b362c 00038 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: DM__ cf3b3668 001C0 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: MCFG cf3b38c4 0003C (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: WD__ cf3b3904 00134 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: SLIC cf3b3a3c 00024 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: ERST cf392f70 00270 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: HEST cf3931e0 003A8 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: BERT cf392dd0 00030 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: EINJ cf392e00 00170 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: SRAT cf3b3bc0 00370 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: TCPA cf3b3f34 00064 (v02 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: SSDT cf3b7000 043F4 (v01  INTEL PPM RCM  80000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2431MB HIGHMEM available.
[    0.000000] 883MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 373fe000
[    0.000000]   low ram: 0 - 373fe000
[    0.000000]   node 0 low ram: 00000000 - 373fe000
[    0.000000]   node 0 bootmap 00009000 - 0000fe80
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0001000000 - 00014ccd2c]    TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
[    0.000000]   #4 [000009e800 - 0000100000]    BIOS reserved ==> [000009e800 - 0000100000]
[    0.000000]   #5 [00014cd000 - 00014d33d1]              BRK ==> [00014cd000 - 00014d33d1]
[    0.000000]   #6 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
[    0.000000]   #7 [0000100000 - 0000a08235]      NEW RAMDISK ==> [0000100000 - 0000a08235]
[    0.000000]   #8 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
[    0.000000] found SMP MP-table at [c00fe710] fe710
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000373fe
[    0.000000]   HighMem  0x000373fe -> 0x000cf379
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000cf379
[    0.000000] On node 0 totalpages: 848663
[    0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3966 pages, LIFO batch:0
[    0.000000]   Normal zone: 1736 pages used for memmap
[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4863 pages used for memmap
[    0.000000]   HighMem zone: 617596 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x32] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x34] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x14] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x21] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x23] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x33] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x35] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x15] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[    0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] SMP: Allowing 32 CPUs, 16 hotplug CPUs
[    0.000000] nr_irqs_gsi: 56
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s34328 r0 d23016 u131072
[    0.000000] pcpu-alloc: s34328 r0 d23016 u131072 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 842032
[    0.000000] Kernel command line: boot=casper initrd=/casper/initrd.gz root=/dev/ram rw showmounts debug --
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000373fe:000cf379)
[    0.000000] Memory: 3349840k/3395044k available (2506k kernel code, 43412k reserved, 1326k data, 380k init, 2489836k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd56000 - 0xfffff000   (2724 kB)
[    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.000000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[    0.000000]       .init : 0xc13bf000 - 0xc141e000   ( 380 kB)
[    0.000000]       .data : 0xc1272b8b - 0xc13be4c4   (1326 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1272b8b   (2506 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:1280
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2394.237 MHz processor.
[    0.000012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.47 BogoMIPS (lpj=9576948)
[    0.000156] Security Framework initialized
[    0.000224] SELinux:  Disabled at boot.
[    0.000296] Mount-cache hash table entries: 512
[    0.000512] Initializing cgroup subsys ns
[    0.000578] Initializing cgroup subsys cpuacct
[    0.000646] Initializing cgroup subsys devices
[    0.000711] Initializing cgroup subsys freezer
[    0.000776] Initializing cgroup subsys net_cls
[    0.000858] CPU: Physical Processor ID: 1
[    0.000922] CPU: Processor Core ID: 0
[    0.000988] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.001096] CPU: L2 cache: 256K
[    0.001158] CPU: L3 cache: 12288K
[    0.001223] mce: CPU supports 9 MCE banks
[    0.001295] CPU0: Thermal monitoring enabled (TM1)
[    0.001363] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[    0.001692] using mwait in idle threads.
[    0.001759] Performance Events: Westmere events, Intel PMU driver.
[    0.001916] ... version:                3
[    0.001980] ... bit width:              48
[    0.002043] ... generic registers:      4
[    0.002107] ... value mask:             0000ffffffffffff
[    0.002174] ... max period:             000000007fffffff
[    0.002240] ... fixed-purpose events:   3
[    0.002304] ... event mask:             000000070000000f
[    0.002372] Checking 'hlt' instruction... OK.
[    0.017343] ACPI: Core revision 20090903
[    0.023947] Overriding APIC driver with bigsmp
[    0.024012] Enabling APIC mode:  Physflat.  Using 2 I/O APICs
[    0.024354] Leaving ESR disabled.
[    0.024589] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064274] CPU0: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    0.172195] Booting processor 1 APIC 0x0 ip 0x6000
[    0.182794] Initializing CPU#1
[    0.183260] Leaving ESR disabled.
[    0.259944] CPU: Physical Processor ID: 0
[    0.259946] CPU: Processor Core ID: 0
[    0.259948] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.259951] CPU: L2 cache: 256K
[    0.259952] CPU: L3 cache: 12288K
[    0.259966] CPU1: Thermal monitoring enabled (TM1)
[    0.259970] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[    0.260048] CPU1: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    0.260773] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.280944] Booting processor 2 APIC 0x22 ip 0x6000
[    0.292528] Initializing CPU#2
[    0.292534] Leaving ESR disabled.
[    0.371746] CPU: Physical Processor ID: 1
[    0.371747] CPU: Processor Core ID: 1
[    0.371749] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.371751] CPU: L2 cache: 256K
[    0.371752] CPU: L3 cache: 12288K
[    0.371762] CPU2: Thermal monitoring enabled (TM1)
[    0.371765] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.371799] CPU2: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    0.372524] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.392706] Booting processor 3 APIC 0x2 ip 0x6000
[    0.403311] Initializing CPU#3
[    0.403777] Leaving ESR disabled.
[    0.483552] CPU: Physical Processor ID: 0
[    0.483554] CPU: Processor Core ID: 1
[    0.483556] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.483559] CPU: L2 cache: 256K
[    0.483560] CPU: L3 cache: 12288K
[    0.483574] CPU3: Thermal monitoring enabled (TM1)
[    0.483578] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.483636] CPU3: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    0.484360] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.504507] Booting processor 4 APIC 0x32 ip 0x6000
[    0.514988] Initializing CPU#4
[    0.515572] Leaving ESR disabled.
[    0.595354] CPU: Physical Processor ID: 1
[    0.595355] CPU: Processor Core ID: 9
[    0.595357] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.595359] CPU: L2 cache: 256K
[    0.595360] CPU: L3 cache: 12288K
[    0.595370] CPU4: Thermal monitoring enabled (TM1)
[    0.595372] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.595465] CPU4: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    0.596191] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[    0.616368] Booting processor 5 APIC 0x12 ip 0x6000
[    0.626967] Initializing CPU#5
[    0.627433] Leaving ESR disabled.
[    0.707160] CPU: Physical Processor ID: 0
[    0.707161] CPU: Processor Core ID: 9
[    0.707164] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.707166] CPU: L2 cache: 256K
[    0.707168] CPU: L3 cache: 12288K
[    0.707181] CPU5: Thermal monitoring enabled (TM1)
[    0.707185] CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.707290] CPU5: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    0.708013] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[    0.728166] Booting processor 6 APIC 0x34 ip 0x6000
[    0.738645] Initializing CPU#6
[    0.739230] Leaving ESR disabled.
[    0.818962] CPU: Physical Processor ID: 1
[    0.818963] CPU: Processor Core ID: 10
[    0.818965] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.818966] CPU: L2 cache: 256K
[    0.818968] CPU: L3 cache: 12288K
[    0.818977] CPU6: Thermal monitoring enabled (TM1)
[    0.818980] CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.818990] CPU6: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    0.819718] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[    0.839900] Booting processor 7 APIC 0x14 ip 0x6000
[    0.850760] Initializing CPU#7
[    0.850965] Leaving ESR disabled.
[    0.930768] CPU: Physical Processor ID: 0
[    0.930769] CPU: Processor Core ID: 10
[    0.930772] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.930774] CPU: L2 cache: 256K
[    0.930776] CPU: L3 cache: 12288K
[    0.930789] CPU7: Thermal monitoring enabled (TM1)
[    0.930793] CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.930822] CPU7: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    0.931545] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[    0.951695] Booting processor 8 APIC 0x21 ip 0x6000
[    0.962175] Initializing CPU#8
[    0.962864] Leaving ESR disabled.
[    1.042570] CPU: Physical Processor ID: 1
[    1.042572] CPU: Processor Core ID: 0
[    1.042574] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.042576] CPU: L2 cache: 256K
[    1.042577] CPU: L3 cache: 12288K
[    1.042588] CPU8: Thermal monitoring enabled (TM1)
[    1.042591] CPU 8 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[    1.042634] CPU8: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    1.043365] checking TSC synchronization [CPU#0 -> CPU#8]: passed.
[    1.063562] Booting processor 9 APIC 0x1 ip 0x6000
[    1.074160] Initializing CPU#9
[    1.074627] Leaving ESR disabled.
[    1.154375] CPU: Physical Processor ID: 0
[    1.154377] CPU: Processor Core ID: 0
[    1.154380] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.154382] CPU: L2 cache: 256K
[    1.154383] CPU: L3 cache: 12288K
[    1.154397] CPU9: Thermal monitoring enabled (TM1)
[    1.154400] CPU 9 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[    1.154484] CPU9: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    1.155211] checking TSC synchronization [CPU#0 -> CPU#9]: passed.
[    1.175359] Booting processor 10 APIC 0x23 ip 0x6000
[    1.185838] Initializing CPU#10
[    1.186424] Leaving ESR disabled.
[    1.266178] CPU: Physical Processor ID: 1
[    1.266179] CPU: Processor Core ID: 1
[    1.266181] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.266182] CPU: L2 cache: 256K
[    1.266183] CPU: L3 cache: 12288K
[    1.266193] CPU10: Thermal monitoring enabled (TM1)
[    1.266196] CPU 10 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[    1.266283] CPU10: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    1.268332] checking TSC synchronization [CPU#0 -> CPU#10]: passed.
[    1.288511] Booting processor 11 APIC 0x3 ip 0x6000
[    1.299114] Initializing CPU#11
[    1.299580] Leaving ESR disabled.
[    1.377983] CPU: Physical Processor ID: 0
[    1.377985] CPU: Processor Core ID: 1
[    1.377988] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.377990] CPU: L2 cache: 256K
[    1.377991] CPU: L3 cache: 12288K
[    1.378004] CPU11: Thermal monitoring enabled (TM1)
[    1.378008] CPU 11 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[    1.378057] CPU11: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    1.378795] checking TSC synchronization [CPU#0 -> CPU#11]: passed.
[    1.398951] Booting processor 12 APIC 0x33 ip 0x6000
[    1.409429] Initializing CPU#12
[    1.410016] Leaving ESR disabled.
[    1.489786] CPU: Physical Processor ID: 1
[    1.489787] CPU: Processor Core ID: 9
[    1.489789] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.489790] CPU: L2 cache: 256K
[    1.489791] CPU: L3 cache: 12288K
[    1.489801] CPU12: Thermal monitoring enabled (TM1)
[    1.489803] CPU 12 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[    1.489874] CPU12: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    1.490612] checking TSC synchronization [CPU#0 -> CPU#12]: passed.
[    1.510796] Booting processor 13 APIC 0x13 ip 0x6000
[    1.521395] Initializing CPU#13
[    1.521861] Leaving ESR disabled.
[    1.601591] CPU: Physical Processor ID: 0
[    1.601593] CPU: Processor Core ID: 9
[    1.601596] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.601598] CPU: L2 cache: 256K
[    1.601599] CPU: L3 cache: 12288K
[    1.601613] CPU13: Thermal monitoring enabled (TM1)
[    1.601617] CPU 13 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[    1.601649] CPU13: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    1.602388] checking TSC synchronization [CPU#0 -> CPU#13]: passed.
[    1.622541] Booting processor 14 APIC 0x35 ip 0x6000
[    1.633022] Initializing CPU#14
[    1.633605] Leaving ESR disabled.
[    1.713393] CPU: Physical Processor ID: 1
[    1.713395] CPU: Processor Core ID: 10
[    1.713397] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.713398] CPU: L2 cache: 256K
[    1.713399] CPU: L3 cache: 12288K
[    1.713409] CPU14: Thermal monitoring enabled (TM1)
[    1.713411] CPU 14 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[    1.713463] CPU14: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    1.714209] checking TSC synchronization [CPU#0 -> CPU#14]: passed.
[    1.734388] Booting processor 15 APIC 0x15 ip 0x6000
[    1.744987] Initializing CPU#15
[    1.745453] Leaving ESR disabled.
[    1.825199] CPU: Physical Processor ID: 0
[    1.825201] CPU: Processor Core ID: 10
[    1.825203] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.825205] CPU: L2 cache: 256K
[    1.825207] CPU: L3 cache: 12288K
[    1.825220] CPU15: Thermal monitoring enabled (TM1)
[    1.825224] CPU 15 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[    1.825310] CPU15: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz stepping 02
[    1.826047] checking TSC synchronization [CPU#0 -> CPU#15]: passed.
[    1.846160] Brought up 16 CPUs
[    1.846225] Total of 16 processors activated (76607.71 BogoMIPS).
[    1.859151] CPU0 attaching sched-domain:
[    1.859223]  domain 0: span 0,8 level SIBLING
[    1.859331]   groups: group c300370c cpus 0 (cpu_power = 589) group c310370c cpus 8 (cpu_power = 589)
[    1.859636]   domain 1: span 0,2,4,6,8,10,12,14 level MC
[    1.859745]    groups: group c3003778 cpus 0,8 (cpu_power = 1178) group c3043778 cpus 2,10 (cpu_power = 1178) group c3083778 cpus 4,12 (cpu_power = 1178) group c30c3778 cpus 6,14 (cpu_power = 1178)
[    1.860248]    domain 2: span 0-15 level CPU
[    1.860355]     groups: group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712) group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4712)
[    1.860668] CPU1 attaching sched-domain:
[    1.860732]  domain 0: span 1,9 level SIBLING
[    1.860840]   groups: group c302370c cpus 1 (cpu_power = 589) group c312370c cpus 9 (cpu_power = 589)
[    1.861147]   domain 1: span 1,3,5,7,9,11,13,15 level MC
[    1.861256]    groups: group c3023778 cpus 1,9 (cpu_power = 1178) group c3063778 cpus 3,11 (cpu_power = 1178) group c30a3778 cpus 5,13 (cpu_power = 1178) group c30e3778 cpus 7,15 (cpu_power = 1178)
[    1.861760]    domain 2: span 0-15 level CPU
[    1.861867]     groups: group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4712) group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[    1.862178] CPU2 attaching sched-domain:
[    1.862242]  domain 0: span 2,10 level SIBLING
[    1.862349]   groups: group c304370c cpus 2 (cpu_power = 589) group c314370c cpus 10 (cpu_power = 589)
[    1.862652]   domain 1: span 0,2,4,6,8,10,12,14 level MC
[    1.862761]    groups: group c3043778 cpus 2,10 (cpu_power = 1178) group c3083778 cpus 4,12 (cpu_power = 1178) group c30c3778 cpus 6,14 (cpu_power = 1178) group c3003778 cpus 0,8 (cpu_power = 1178)
[    1.863265]    domain 2: span 0-15 level CPU
[    1.863372]     groups: group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712) group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4712)
[    1.863681] CPU3 attaching sched-domain:
[    1.863745]  domain 0: span 3,11 level SIBLING
[    1.863852]   groups: group c306370c cpus 3 (cpu_power = 589) group c316370c cpus 11 (cpu_power = 589)
[    1.864154]   domain 1: span 1,3,5,7,9,11,13,15 level MC
[    1.864263]    groups: group c3063778 cpus 3,11 (cpu_power = 1178) group c30a3778 cpus 5,13 (cpu_power = 1178) group c30e3778 cpus 7,15 (cpu_power = 1178) group c3023778 cpus 1,9 (cpu_power = 1178)
[    1.864766]    domain 2: span 0-15 level CPU
[    1.864873]     groups: group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4712) group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[    1.865185] CPU4 attaching sched-domain:
[    1.865249]  domain 0: span 4,12 level SIBLING
[    1.865360]   groups: group c308370c cpus 4 (cpu_power = 589) group c318370c cpus 12 (cpu_power = 589)
[    1.865662]   domain 1: span 0,2,4,6,8,10,12,14 level MC
[    1.865771]    groups: group c3083778 cpus 4,12 (cpu_power = 1178) group c30c3778 cpus 6,14 (cpu_power = 1178) group c3003778 cpus 0,8 (cpu_power = 1178) group c3043778 cpus 2,10 (cpu_power = 1178)
[    1.866275]    domain 2: span 0-15 level CPU
[    1.866382]     groups: group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712) group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4712)
[    1.866692] CPU5 attaching sched-domain:
[    1.866756]  domain 0: span 5,13 level SIBLING
[    1.866865]   groups: group c30a370c cpus 5 (cpu_power = 589) group c31a370c cpus 13 (cpu_power = 589)
[    1.867167]   domain 1: span 1,3,5,7,9,11,13,15 level MC
[    1.867277]    groups: group c30a3778 cpus 5,13 (cpu_power = 1178) group c30e3778 cpus 7,15 (cpu_power = 1178) group c3023778 cpus 1,9 (cpu_power = 1178) group c3063778 cpus 3,11 (cpu_power = 1178)
[    1.867780]    domain 2: span 0-15 level CPU
[    1.867887]     groups: group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4712) group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[    1.868196] CPU6 attaching sched-domain:
[    1.868261]  domain 0: span 6,14 level SIBLING
[    1.868368]   groups: group c30c370c cpus 6 (cpu_power = 589) group c31c370c cpus 14 (cpu_power = 589)
[    1.868670]   domain 1: span 0,2,4,6,8,10,12,14 level MC
[    1.868779]    groups: group c30c3778 cpus 6,14 (cpu_power = 1178) group c3003778 cpus 0,8 (cpu_power = 1178) group c3043778 cpus 2,10 (cpu_power = 1178) group c3083778 cpus 4,12 (cpu_power = 1178)
[    1.869285]    domain 2: span 0-15 level CPU
[    1.869393]     groups: group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712) group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4712)
[    1.869702] CPU7 attaching sched-domain:
[    1.869766]  domain 0: span 7,15 level SIBLING
[    1.869873]   groups: group c30e370c cpus 7 (cpu_power = 589) group c31e370c cpus 15 (cpu_power = 589)
[    1.870177]   domain 1: span 1,3,5,7,9,11,13,15 level MC
[    1.870286]    groups: group c30e3778 cpus 7,15 (cpu_power = 1178) group c3023778 cpus 1,9 (cpu_power = 1177) group c3063778 cpus 3,11 (cpu_power = 1178) group c30a3778 cpus 5,13 (cpu_power = 1178)
[    1.870790]    domain 2: span 0-15 level CPU
[    1.870897]     groups: group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4711) group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[    1.871209] CPU8 attaching sched-domain:
[    1.871273]  domain 0: span 0,8 level SIBLING
[    1.871381]   groups: group c310370c cpus 8 (cpu_power = 589) group c300370c cpus 0 (cpu_power = 589)
[    1.871684]   domain 1: span 0,2,4,6,8,10,12,14 level MC
[    1.871793]    groups: group c3003778 cpus 0,8 (cpu_power = 1178) group c3043778 cpus 2,10 (cpu_power = 1177) group c3083778 cpus 4,12 (cpu_power = 1177) group c30c3778 cpus 6,14 (cpu_power = 1178)
[    1.872297]    domain 2: span 0-15 level CPU
[    1.872404]     groups: group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712) group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4711)
[    1.872713] CPU9 attaching sched-domain:
[    1.872777]  domain 0: span 1,9 level SIBLING
[    1.872885]   groups: group c312370c cpus 9 (cpu_power = 589) group c302370c cpus 1 (cpu_power = 588)
[    1.873190]   domain 1: span 1,3,5,7,9,11,13,15 level MC
[    1.873299]    groups: group c3023778 cpus 1,9 (cpu_power = 1177) group c3063778 cpus 3,11 (cpu_power = 1178) group c30a3778 cpus 5,13 (cpu_power = 1178) group c30e3778 cpus 7,15 (cpu_power = 1178)
[    1.873801]    domain 2: span 0-15 level CPU
[    1.873908]     groups: group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4711) group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[    1.874218] CPU10 attaching sched-domain:
[    1.875600]  domain 0: span 2,10 level SIBLING
[    1.875707]   groups: group c314370c cpus 10 (cpu_power = 589) group c304370c cpus 2 (cpu_power = 589)
[    1.876010]   domain 1: span 0,2,4,6,8,10,12,14 level MC
[    1.876120]    groups: group c3043778 cpus 2,10 (cpu_power = 1178) group c3083778 cpus 4,12 (cpu_power = 1178) group c30c3778 cpus 6,14 (cpu_power = 1178) group c3003778 cpus 0,8 (cpu_power = 1178)
[    1.876624]    domain 2: span 0-15 level CPU
[    1.876731]     groups: group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712) group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4711)
[    1.877040] CPU11 attaching sched-domain:
[    1.877107]  domain 0: span 3,11 level SIBLING
[    1.877215]   groups: group c316370c cpus 11 (cpu_power = 589) group c306370c cpus 3 (cpu_power = 589)
[    1.877518]   domain 1: span 1,3,5,7,9,11,13,15 level MC
[    1.877627]    groups: group c3063778 cpus 3,11 (cpu_power = 1178) group c30a3778 cpus 5,13 (cpu_power = 1178) group c30e3778 cpus 7,15 (cpu_power = 1178) group c3023778 cpus 1,9 (cpu_power = 1177)
[    1.878129]    domain 2: span 0-15 level CPU
[    1.878236]     groups: group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4711) group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[    1.878546] CPU12 attaching sched-domain:
[    1.878610]  domain 0: span 4,12 level SIBLING
[    1.878717]   groups: group c318370c cpus 12 (cpu_power = 589) group c308370c cpus 4 (cpu_power = 588)
[    1.879020]   domain 1: span 0,2,4,6,8,10,12,14 level MC
[    1.879129]    groups: group c3083778 cpus 4,12 (cpu_power = 1177) group c30c3778 cpus 6,14 (cpu_power = 1178) group c3003778 cpus 0,8 (cpu_power = 1178) group c3043778 cpus 2,10 (cpu_power = 1177)
[    1.879632]    domain 2: span 0-15 level CPU
[    1.879739]     groups: group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712) group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4711)
[    1.880049] CPU13 attaching sched-domain:
[    1.880114]  domain 0: span 5,13 level SIBLING
[    1.880221]   groups: group c31a370c cpus 13 (cpu_power = 589) group c30a370c cpus 5 (cpu_power = 589)
[    1.880524]   domain 1: span 1,3,5,7,9,11,13,15 level MC
[    1.880632]    groups: group c30a3778 cpus 5,13 (cpu_power = 1178) group c30e3778 cpus 7,15 (cpu_power = 1178) group c3023778 cpus 1,9 (cpu_power = 1177) group c3063778 cpus 3,11 (cpu_power = 1178)
[    1.881139]    domain 2: span 0-15 level CPU
[    1.881247]     groups: group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4711) group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[    1.881557] CPU14 attaching sched-domain:
[    1.881622]  domain 0: span 6,14 level SIBLING
[    1.881730]   groups: group c31c370c cpus 14 (cpu_power = 589) group c30c370c cpus 6 (cpu_power = 589)
[    1.882033]   domain 1: span 0,2,4,6,8,10,12,14 level MC
[    1.882142]    groups: group c30c3778 cpus 6,14 (cpu_power = 1178) group c3003778 cpus 0,8 (cpu_power = 1178) group c3043778 cpus 2,10 (cpu_power = 1177) group c3083778 cpus 4,12 (cpu_power = 1177)
[    1.882646]    domain 2: span 0-15 level CPU
[    1.882754]     groups: group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712) group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4711)
[    1.883064] CPU15 attaching sched-domain:
[    1.883128]  domain 0: span 7,15 level SIBLING
[    1.883236]   groups: group c31e370c cpus 15 (cpu_power = 589) group c30e370c cpus 7 (cpu_power = 589)
[    1.883542]   domain 1: span 1,3,5,7,9,11,13,15 level MC
[    1.883651]    groups: group c30e3778 cpus 7,15 (cpu_power = 1178) group c3023778 cpus 1,9 (cpu_power = 1177) group c3063778 cpus 3,11 (cpu_power = 1178) group c30a3778 cpus 5,13 (cpu_power = 1178)
[    1.884159]    domain 2: span 0-15 level CPU
[    1.884266]     groups: group c30237e4 cpus 1,3,5,7,9,11,13,15 (cpu_power = 4711) group c30037e4 cpus 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[    1.885426] devtmpfs: initialized
[    1.885813] regulator: core version 0.5
[    1.885925] NET: Registered protocol family 16
[    1.886057] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    1.886142] ACPI: bus type pci registered
[    1.886260] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    1.886330] PCI: MCFG area at e0000000 reserved in E820
[    1.886397] PCI: Using MMCONFIG for extended config space
[    1.886463] PCI: Using configuration type 1 for base access
[    1.887093] bio: create slab <bio-0> at 0
[    1.887851] ACPI: EC: Look up EC in DSDT
[    1.890466] ACPI: BIOS _OSI(Linux) query ignored
[    1.890652] ACPI: Interpreter enabled
[    1.890718] ACPI: (supports S0 S4 S5)
[    1.890917] ACPI: Using IOAPIC for interrupt routing
[    1.895117] ACPI: No dock devices found.
[    1.895529] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    1.895668] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    1.895738] pci 0000:00:00.0: PME# disabled
[    1.895868] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.895937] pci 0000:00:01.0: PME# disabled
[    1.896066] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    1.896135] pci 0000:00:03.0: PME# disabled
[    1.896264] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    1.896333] pci 0000:00:04.0: PME# disabled
[    1.896463] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    1.896532] pci 0000:00:05.0: PME# disabled
[    1.896660] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    1.896729] pci 0000:00:06.0: PME# disabled
[    1.896858] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    1.896927] pci 0000:00:07.0: PME# disabled
[    1.897057] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    1.897131] pci 0000:00:09.0: PME# disabled
[    1.897385] pci 0000:00:1a.0: reg 20 io port: [0xec40-0xec5f]
[    1.897523] pci 0000:00:1a.1: reg 20 io port: [0xec60-0xec7f]
[    1.897662] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0fe000-0xdf0fe3ff]
[    1.897796] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    1.897866] pci 0000:00:1a.7: PME# disabled
[    1.897976] pci 0000:00:1d.0: reg 20 io port: [0xec80-0xec9f]
[    1.898112] pci 0000:00:1d.1: reg 20 io port: [0xeca0-0xecbf]
[    1.898251] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0ff000-0xdf0ff3ff]
[    1.898384] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    1.898454] pci 0000:00:1d.7: PME# disabled
[    1.898639] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[    1.898725] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[    1.898810] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[    1.898950] pci 0000:00:1f.2: reg 10 io port: [0xec10-0xec17]
[    1.899020] pci 0000:00:1f.2: reg 14 io port: [0xec08-0xec0b]
[    1.899091] pci 0000:00:1f.2: reg 18 io port: [0xec18-0xec1f]
[    1.899162] pci 0000:00:1f.2: reg 1c io port: [0xec0c-0xec0f]
[    1.899232] pci 0000:00:1f.2: reg 20 io port: [0xec20-0xec2f]
[    1.899303] pci 0000:00:1f.2: reg 24 io port: [0xec30-0xec3f]
[    1.899448] pci 0000:01:00.0: reg 10 64bit mmio: [0xd6000000-0xd7ffffff]
[    1.899579] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    1.899659] pci 0000:01:00.0: PME# disabled
[    1.899770] pci 0000:01:00.1: reg 10 64bit mmio: [0xd8000000-0xd9ffffff]
[    1.899901] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[    1.899970] pci 0000:01:00.1: PME# disabled
[    1.900085] pci 0000:00:01.0: bridge 32bit mmio: [0xd6000000-0xd9ffffff]
[    1.900195] pci 0000:02:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[    1.900326] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.900395] pci 0000:02:00.0: PME# disabled
[    1.900505] pci 0000:02:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[    1.900636] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[    1.900706] pci 0000:02:00.1: PME# disabled
[    1.900820] pci 0000:00:03.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[    1.900912] pci 0000:03:00.0: reg 10 io port: [0xfc00-0xfcff]
[    1.900985] pci 0000:03:00.0: reg 14 64bit mmio: [0xdf1bc000-0xdf1bffff]
[    1.901063] pci 0000:03:00.0: reg 1c 64bit mmio: [0xdf1c0000-0xdf1fffff]
[    1.901138] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xdf100000-0xdf13ffff]
[    1.901244] pci 0000:03:00.0: supports D1 D2
[    1.901335] pci 0000:00:04.0: bridge io port: [0xf000-0xffff]
[    1.901403] pci 0000:00:04.0: bridge 32bit mmio: [0xdf100000-0xdf1fffff]
[    1.901598] pci 0000:08:03.0: reg 10 32bit mmio pref: [0xd5800000-0xd5ffffff]
[    1.901672] pci 0000:08:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
[    1.901746] pci 0000:08:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
[    1.901832] pci 0000:08:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[    1.901964] pci 0000:00:1e.0: transparent bridge
[    1.902033] pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
[    1.902106] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd5800000-0xd5ffffff]
[    1.902198] pci_bus 0000:00: on NUMA node 0
[    1.902269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.902664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    1.902801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    1.902936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    1.903070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    1.903205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[    1.903339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[    1.903476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
[    1.903614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[    1.906061] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[    1.906696] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[    1.907327] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[    1.907958] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[    1.908590] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[    1.909226] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[    1.909858] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    1.910592] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[    1.911211] vgaarb: device added: PCI:0000:08:03.0,decodes=io+mem,owns=io+mem,locks=none
[    1.911297] vgaarb: loaded
[    1.911403] PCI: Using ACPI for IRQ routing
[    1.911621] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    1.911903] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    1.913986] Switching to clocksource tsc
[    1.915939] pnp: PnP ACPI init
[    1.916024] ACPI: bus type pnp registered
[    1.920341] pnp: PnP ACPI: found 12 devices
[    1.920410] ACPI: ACPI bus type pnp unregistered
[    1.920479] PnPBIOS: Disabled by ACPI PNP
[    1.921957] system 00:07: ioport range 0x800-0x87f has been reserved
[    1.922029] system 00:07: ioport range 0x880-0x8ff has been reserved
[    1.922101] system 00:07: ioport range 0x900-0x91f has been reserved
[    1.922173] system 00:07: ioport range 0x920-0x923 has been reserved
[    1.922245] system 00:07: ioport range 0x924-0x924 has been reserved
[    1.922317] system 00:07: ioport range 0xc00-0xc7f has been reserved
[    1.922389] system 00:07: ioport range 0xca0-0xca7 has been reserved
[    1.922467] system 00:07: ioport range 0xca9-0xcab has been reserved
[    1.922539] system 00:07: ioport range 0xcad-0xcaf has been reserved
[    1.922614] system 00:08: ioport range 0xca8-0xca8 has been reserved
[    1.922686] system 00:08: ioport range 0xcac-0xcac has been reserved
[    1.922761] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[    1.922837] system 00:0b: iomem range 0xfed90000-0xfed91fff has been reserved
[    1.957854] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    1.957925] pci 0000:00:01.0:   IO window: disabled
[    1.957996] pci 0000:00:01.0:   MEM window: 0xd6000000-0xd9ffffff
[    1.958068] pci 0000:00:01.0:   PREFETCH window: disabled
[    1.958141] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[    1.958211] pci 0000:00:03.0:   IO window: disabled
[    1.958282] pci 0000:00:03.0:   MEM window: 0xda000000-0xddffffff
[    1.958357] pci 0000:00:03.0:   PREFETCH window: disabled
[    1.958430] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[    1.958501] pci 0000:00:04.0:   IO window: 0xf000-0xffff
[    1.958573] pci 0000:00:04.0:   MEM window: 0xdf100000-0xdf1fffff
[    1.958645] pci 0000:00:04.0:   PREFETCH window: disabled
[    1.958717] pci 0000:00:05.0: PCI bridge, secondary bus 0000:04
[    1.958787] pci 0000:00:05.0:   IO window: disabled
[    1.958858] pci 0000:00:05.0:   MEM window: disabled
[    1.958928] pci 0000:00:05.0:   PREFETCH window: disabled
[    1.959000] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
[    1.959070] pci 0000:00:06.0:   IO window: disabled
[    1.959140] pci 0000:00:06.0:   MEM window: disabled
[    1.959210] pci 0000:00:06.0:   PREFETCH window: disabled
[    1.959282] pci 0000:00:07.0: PCI bridge, secondary bus 0000:06
[    1.959352] pci 0000:00:07.0:   IO window: disabled
[    1.959423] pci 0000:00:07.0:   MEM window: disabled
[    1.959492] pci 0000:00:07.0:   PREFETCH window: disabled
[    1.959572] pci 0000:00:09.0: PCI bridge, secondary bus 0000:07
[    1.959642] pci 0000:00:09.0:   IO window: disabled
[    1.959712] pci 0000:00:09.0:   MEM window: disabled
[    1.959782] pci 0000:00:09.0:   PREFETCH window: disabled
[    1.959856] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[    1.959926] pci 0000:00:1e.0:   IO window: disabled
[    1.959997] pci 0000:00:1e.0:   MEM window: 0xde000000-0xdeffffff
[    1.960070] pci 0000:00:1e.0:   PREFETCH window: 0x000000d5800000-0x000000d5ffffff
[    1.960172] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[    1.960246] pci 0000:00:01.0: setting latency timer to 64
[    1.960321] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[    1.960394] pci 0000:00:03.0: setting latency timer to 64
[    1.960468] pci 0000:00:04.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[    1.960542] pci 0000:00:04.0: setting latency timer to 64
[    1.960616] pci 0000:00:05.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[    1.960689] pci 0000:00:05.0: setting latency timer to 64
[    1.960764] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[    1.960837] pci 0000:00:06.0: setting latency timer to 64
[    1.960912] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[    1.960985] pci 0000:00:07.0: setting latency timer to 64
[    1.961060] pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[    1.961133] pci 0000:00:09.0: setting latency timer to 64
[    1.961206] pci 0000:00:1e.0: setting latency timer to 64
[    1.961278] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    1.961348] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    1.961420] pci_bus 0000:01: resource 1 mem: [0xd6000000-0xd9ffffff]
[    1.961492] pci_bus 0000:02: resource 1 mem: [0xda000000-0xddffffff]
[    1.961564] pci_bus 0000:03: resource 0 io:  [0xf000-0xffff]
[    1.961634] pci_bus 0000:03: resource 1 mem: [0xdf100000-0xdf1fffff]
[    1.961706] pci_bus 0000:08: resource 1 mem: [0xde000000-0xdeffffff]
[    1.961778] pci_bus 0000:08: resource 2 pref mem [0xd5800000-0xd5ffffff]
[    1.961850] pci_bus 0000:08: resource 3 io:  [0x00-0xffff]
[    1.961919] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff]
[    1.962022] NET: Registered protocol family 2
[    1.962190] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.962535] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.963000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.963217] TCP: Hash tables configured (established 131072 bind 65536)
[    1.963289] TCP reno registered
[    1.963499] NET: Registered protocol family 1
[    1.963595] pci 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.963681] pci 0000:00:1a.0: PCI INT A disabled
[    1.963754] pci 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    1.963839] pci 0000:00:1a.1: PCI INT B disabled
[    1.963916] pci 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    1.982319] pci 0000:00:1a.7: PCI INT C disabled
[    1.982393] pci 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.982479] pci 0000:00:1d.0: PCI INT A disabled
[    1.982551] pci 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.982638] pci 0000:00:1d.1: PCI INT B disabled
[    1.982712] pci 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.982797] pci 0000:00:1d.7: PCI INT A disabled
[    1.982877] pci 0000:08:03.0: Boot video device
[    1.982977] Unpacking initramfs...
[    2.289970] Freeing initrd memory: 9248k freed
[    2.293392] audit: initializing netlink socket (disabled)
[    2.293470] type=2000 audit(1350286688.944:1): initialized
[    2.299816] highmem bounce pool size: 64 pages
[    2.299887] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.301712] VFS: Disk quotas dquot_6.5.2
[    2.301838] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.301992] msgmni has been set to 1700
[    2.302548] alg: No test for stdrng (krng)
[    2.302662] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.302750] io scheduler noop registered
[    2.302816] io scheduler anticipatory registered
[    2.302883] io scheduler deadline registered
[    2.302995] io scheduler cfq registered (default)
[    2.303189] pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
[    2.303263] pcieport 0000:00:01.0: setting latency timer to 64
[    2.303442] pcieport 0000:00:03.0: irq 57 for MSI/MSI-X
[    2.303515] pcieport 0000:00:03.0: setting latency timer to 64
[    2.303689] pcieport 0000:00:04.0: irq 58 for MSI/MSI-X
[    2.303763] pcieport 0000:00:04.0: setting latency timer to 64
[    2.303938] pcieport 0000:00:05.0: irq 59 for MSI/MSI-X
[    2.304012] pcieport 0000:00:05.0: setting latency timer to 64
[    2.304186] pcieport 0000:00:06.0: irq 60 for MSI/MSI-X
[    2.304260] pcieport 0000:00:06.0: setting latency timer to 64
[    2.304436] pcieport 0000:00:07.0: irq 61 for MSI/MSI-X
[    2.304509] pcieport 0000:00:07.0: setting latency timer to 64
[    2.304689] pcieport 0000:00:09.0: irq 62 for MSI/MSI-X
[    2.304762] pcieport 0000:00:09.0: setting latency timer to 64
[    2.305166] aer 0000:00:01.0:pcie02: service driver aer loaded
[    2.305272] aer 0000:00:03.0:pcie02: service driver aer loaded
[    2.305373] aer 0000:00:04.0:pcie02: service driver aer loaded
[    2.305474] aer 0000:00:05.0:pcie02: service driver aer loaded
[    2.305575] aer 0000:00:06.0:pcie02: service driver aer loaded
[    2.305676] aer 0000:00:07.0:pcie02: service driver aer loaded
[    2.305777] aer 0000:00:09.0:pcie02: service driver aer loaded
[    2.305929] isapnp: Scanning for PnP cards...
[    2.658715] isapnp: No Plug & Play device found
[    2.660051] Linux agpgart interface v0.103
[    2.660234] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.660403] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.660573] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.660902] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.661104] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.661407] PNP: No PS/2 controller found. Probing ports directly.
[    2.664164] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.664240] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.664381] mice: PS/2 mouse device common for all mice
[    2.664490] rtc_cmos 00:04: RTC can wake from S4
[    2.664591] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.664684] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    2.664766] cpuidle: using governor ladder
[    2.664832] cpuidle: using governor menu
[    2.664901] No iBFT detected.
[    2.665367] TCP cubic registered
[    2.665594] NET: Registered protocol family 10
[    2.666529] Mobile IPv6
[    2.666594] NET: Registered protocol family 17
[    2.666673] Using IPI No-Shortcut mode
[    2.666797] PM: Resume from disk failed.
[    2.666871] registered taskstats version 1
[    2.667622] rtc_cmos 00:04: setting system clock to 2012-10-15 07:38:10 UTC (1350286690)
[    2.667765] Initalizing network drop monitor service
[    2.667883] Freeing unused kernel memory: 380k freed
[    2.668120] Write protecting the kernel text: 2508k
[    2.668212] Write protecting the kernel read-only data: 920k
[    2.684280] udev[196]: starting version 164
[    2.702258] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
[    2.702375] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[    2.702455] bnx2 0000:01:00.0: setting latency timer to 64
[    2.702653] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[    2.719815] usbcore: registered new interface driver usbfs
[    2.719906] usbcore: registered new interface driver hub
[    2.720018] usbcore: registered new device driver usb
[    2.721630] bnx2: Can't load firmware file "bnx2/bnx2-mips-09-5.0.0.j3.fw"
[    2.721719] bnx2 0000:01:00.0: PCI INT A disabled
[    2.721797] bnx2: probe of 0000:01:00.0 failed with error -2
[    2.721894] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
[    2.721970] bnx2 0000:01:00.1: setting latency timer to 64
[    2.722153] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[    2.724223] bnx2: Can't load firmware file "bnx2/bnx2-mips-09-5.0.0.j3.fw"
[    2.724310] bnx2 0000:01:00.1: PCI INT B disabled
[    2.725763] bnx2: probe of 0000:01:00.1 failed with error -2
[    2.725870] bnx2 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[    2.725950] bnx2 0000:02:00.0: setting latency timer to 64
[    2.726144] bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[    2.728102] bnx2: Can't load firmware file "bnx2/bnx2-mips-09-5.0.0.j3.fw"
[    2.728188] bnx2 0000:02:00.0: PCI INT A disabled
[    2.728261] bnx2: probe of 0000:02:00.0 failed with error -2
[    2.728348] bnx2 0000:02:00.1: PCI INT B -> GSI 42 (level, low) -> IRQ 42
[    2.728423] bnx2 0000:02:00.1: setting latency timer to 64
[    2.728603] bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[    2.730960] bnx2: Can't load firmware file "bnx2/bnx2-mips-09-5.0.0.j3.fw"
[    2.731046] bnx2 0000:02:00.1: PCI INT B disabled
[    2.731124] bnx2: probe of 0000:02:00.1 failed with error -2
[    2.744149] SCSI subsystem initialized
[    2.747449] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.747549] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    2.747640] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    2.747714] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    2.747833] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    2.747955] ehci_hcd 0000:00:1a.7: debug port 1
[    2.751888] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    2.751977] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0fe000
[    2.765357] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    2.765451] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.765526] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.765615] usb usb1: Product: EHCI Host Controller
[    2.765685] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[    2.765757] usb usb1: SerialNumber: 0000:00:1a.7
[    2.765933] usb usb1: configuration #1 chosen from 1 choice
[    2.766049] hub 1-0:1.0: USB hub found
[    2.766123] hub 1-0:1.0: 4 ports detected
[    2.766249] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.766336] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.766409] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.766488] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    2.766605] ehci_hcd 0000:00:1d.7: debug port 1
[    2.767460] libata version 3.00 loaded.
[    2.768895] uhci_hcd: USB Universal Host Controller Interface driver
[    2.770563] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    2.770653] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ff000
[    2.771685] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[    2.771781] megasas: 0x1000:0x0079:0x1028:0x1f17: bus 3:slot 0:func 0
[    2.771923] megaraid_sas 0000:03:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
[    2.772019] megaraid_sas 0000:03:00.0: setting latency timer to 64
[    2.772146] megasas: FW now in Ready state
[    2.785324] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.785410] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.785483] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.785570] usb usb2: Product: EHCI Host Controller
[    2.785638] usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[    2.785708] usb usb2: SerialNumber: 0000:00:1d.7
[    2.785848] usb usb2: configuration #1 chosen from 1 choice
[    2.785860] scsi0 : LSI SAS based MegaRAID driver
[    2.786033] hub 2-0:1.0: USB hub found
[    2.786107] hub 2-0:1.0: 4 ports detected
[    2.786235] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.786297] scsi 0:0:0:0: Direct-Access     HITACHI  HUC109060CSS600  N2B4 PQ: 0 ANSI: 6
[    2.786406] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.786477] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.786556] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.786570] scsi 0:0:1:0: Direct-Access     HITACHI  HUC109060CSS600  N2B4 PQ: 0 ANSI: 6
[    2.786769] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
[    2.786816] scsi 0:0:2:0: Direct-Access     HITACHI  HUC109060CSS600  N2B4 PQ: 0 ANSI: 6
[    2.786957] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.787029] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.787057] scsi 0:0:3:0: Direct-Access     HITACHI  HUC109060CSS600  N2B4 PQ: 0 ANSI: 6
[    2.787209] usb usb3: Product: UHCI Host Controller
[    2.787277] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    2.787348] usb usb3: SerialNumber: 0000:00:1a.0
[    2.787486] usb usb3: configuration #1 chosen from 1 choice
[    2.787586] hub 3-0:1.0: USB hub found
[    2.787657] hub 3-0:1.0: 2 ports detected
[    2.787781] ata_piix 0000:00:1f.2: version 2.13
[    2.787870] ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[    2.787951] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    2.914928] scsi 0:0:32:0: Enclosure         DP       BACKPLANE        1.07 PQ: 0 ANSI: 5
[    2.923735] scsi 0:2:0:0: Direct-Access     DELL     PERC H700        2.10 PQ: 0 ANSI: 5
[    2.938784] sd 0:2:0:0: [sda] 2341994496 512-byte logical blocks: (1.19 TB/1.08 TiB)
[    2.938935] sd 0:2:0:0: [sda] Write Protect is off
[    2.939004] sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
[    2.939110] sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.939366]  sda: sda1 sda2 <
[    2.940715] ata_piix 0000:00:1f.2: setting latency timer to 64
[    2.940907] scsi1 : ata_piix
[    2.941051] scsi2 : ata_piix
[    2.941164] ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 23
[    2.941250] ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 23
[    2.941352] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    2.941433] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    2.941504] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.941581] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    2.941697] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
[    2.941798] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.941870] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.941957] usb usb4: Product: UHCI Host Controller
[    2.942025] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    2.942095] usb usb4: SerialNumber: 0000:00:1a.1
[    2.942236] usb usb4: configuration #1 chosen from 1 choice
[    2.942333] hub 4-0:1.0: USB hub found
[    2.942403] hub 4-0:1.0: 2 ports detected
[    2.942510] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.942587] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.942658] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.942731] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    2.942839] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
[    2.942935] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.943008] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.943094] usb usb5: Product: UHCI Host Controller
[    2.943163] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    2.943233] usb usb5: SerialNumber: 0000:00:1d.0
[    2.943357] usb usb5: configuration #1 chosen from 1 choice
[    2.943453] hub 5-0:1.0: USB hub found
[    2.943522] hub 5-0:1.0: 2 ports detected
[    2.943628] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    2.943709] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.943780] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.943853] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    2.943986] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
[    2.944082] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.944154] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.944240] usb usb6: Product: UHCI Host Controller
[    2.944308] usb usb6: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    2.944378] usb usb6: SerialNumber: 0000:00:1d.1
[    2.944504] usb usb6: configuration #1 chosen from 1 choice
[    2.944599] hub 6-0:1.0: USB hub found
[    2.944669] hub 6-0:1.0: 2 ports detected
[    2.947365]  sda5 >
[    2.947834] sd 0:2:0:0: [sda] Attached SCSI disk
[    3.076478] usb 1-3: new high speed USB device using ehci_hcd and address 2
[    3.078547] ses 0:0:32:0: Attached Enclosure device
[    3.212563] usb 1-3: New USB device found, idVendor=0424, idProduct=2514
[    3.212636] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.212769] usb 1-3: configuration #1 chosen from 1 choice
[    3.212968] hub 1-3:1.0: USB hub found
[    3.213059] hub 1-3:1.0: 3 ports detected
[    3.415967] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.424153] ata1.00: ATAPI: TSSTcorp DVD+/-RW SN-208BB, D150, max UDMA/100
[    3.440138] ata1.00: configured for UDMA/100
[    3.442254] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW SN-208BB D150 PQ: 0 ANSI: 5
[    3.483976] usb 1-3.1: new low speed USB device using ehci_hcd and address 3
[    3.600392] usb 1-3.1: New USB device found, idVendor=03f0, idProduct=0024
[    3.600466] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.600553] usb 1-3.1: Product: HP Basic USB Keyboard
[    3.600621] usb 1-3.1: Manufacturer: CHICONY
[    3.600744] usb 1-3.1: configuration #1 chosen from 1 choice
[    3.679638] usb 1-3.2: new low speed USB device using ehci_hcd and address 4
[    3.779458] usb 1-3.2: New USB device found, idVendor=046d, idProduct=c018
[    3.779532] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.779620] usb 1-3.2: Product: USB Optical Mouse
[    3.779688] usb 1-3.2: Manufacturer: Logitech
[    3.779820] usb 1-3.2: configuration #1 chosen from 1 choice
[    3.786081] usbcore: registered new interface driver hiddev
[    3.790751] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.1/1-3.1:1.0/input/input0
[    3.792256] generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1a.7-3.1/input0
[    3.793932] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input1
[    3.794077] generic-usb 0003:046D:C018.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.7-3.2/input0
[    3.794190] usbcore: registered new interface driver usbhid
[    3.794260] usbhid: v2.6:USB HID core driver
[    3.967033] ata2: failed to resume link (SControl 0)
[    3.977810] ata2: SATA link down (SStatus 4 SControl 0)
[    3.991479] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.991571] Uniform CD-ROM driver Revision: 3.20
[    3.991723] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.996100] ses 0:0:32:0: Attached scsi generic sg0 type 13
[    3.996203] sd 0:2:0:0: Attached scsi generic sg1 type 0
[    3.996305] sr 1:0:0:0: Attached scsi generic sg2 type 5
[    4.018947] usb 5-2: new full speed USB device using uhci_hcd and address 2
[    4.181804] usb 5-2: New USB device found, idVendor=0624, idProduct=0248
[    4.181878] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.181952] usb 5-2: Product: USB Composite Device-0
[    4.182020] usb 5-2: Manufacturer: Avocent
[    4.182087] usb 5-2: SerialNumber: 20080519
[    4.182234] usb 5-2: configuration #1 chosen from 1 choice
[    4.195955] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input2
[    4.196086] generic-usb 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[    4.201899] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input3
[    4.202041] generic-usb 0003:0624:0248.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[   13.409900] sr 1:0:0:0: [sr0] Unhandled sense code
[   13.409974] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   13.410094] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   13.410312] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
[   13.410476] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 67 44 00 00 01 00
[   13.411132] end_request: I/O error, dev sr0, sector 367888
[   13.411205] Buffer I/O error on device sr0, logical block 91972
[   19.827938] sr 1:0:0:0: [sr0] Unhandled sense code
[   19.828007] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   19.828125] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   19.828329] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
[   19.828489] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 67 44 00 00 01 00
[   19.829148] end_request: I/O error, dev sr0, sector 367888
[   19.829224] Buffer I/O error on device sr0, logical block 91972
[   26.242489] sr 1:0:0:0: [sr0] Unhandled sense code
[   26.242559] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   26.242676] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   26.242891] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
[   26.243053] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 67 44 00 00 01 00
[   26.243698] end_request: I/O error, dev sr0, sector 367888
[   26.243768] Buffer I/O error on device sr0, logical block 91972
[   32.659186] sr 1:0:0:0: [sr0] Unhandled sense code
[   32.659256] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   32.659374] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   32.659577] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
[   32.659738] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 67 44 00 00 01 00
[   32.660383] end_request: I/O error, dev sr0, sector 367888
[   32.660465] Buffer I/O error on device sr0, logical block 91972
[   39.077306] sr 1:0:0:0: [sr0] Unhandled sense code
[   39.077375] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   39.077493] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   39.077697] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
[   39.077857] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 67 44 00 00 01 00
[   39.078513] end_request: I/O error, dev sr0, sector 367888
[   39.078584] Buffer I/O error on device sr0, logical block 91972
[   45.493149] sr 1:0:0:0: [sr0] Unhandled sense code
[   45.493222] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   45.493357] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   45.493566] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
[   45.493735] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 67 44 00 00 01 00
[   45.494386] end_request: I/O error, dev sr0, sector 367888
[   45.494458] Buffer I/O error on device sr0, logical block 91972
[   51.908763] sr 1:0:0:0: [sr0] Unhandled sense code
[   51.908832] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   51.908949] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   51.909166] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
[   51.909325] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 67 44 00 00 01 00
[   51.909971] end_request: I/O error, dev sr0, sector 367888
[   51.910041] Buffer I/O error on device sr0, logical block 91972
[   58.835088] sr 1:0:0:0: [sr0] Unhandled sense code
[   58.835158] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   58.835275] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   58.835478] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
[   58.835639] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 67 44 00 00 01 00
[   58.836283] end_request: I/O error, dev sr0, sector 367888
[   58.836355] Buffer I/O error on device sr0, logical block 91972
[   65.250783] sr 1:0:0:0: [sr0] Unhandled sense code
[   65.250853] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   65.250972] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   65.251175] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
[   65.251336] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 67 44 00 00 01 00
[   65.251989] end_request: I/O error, dev sr0, sector 367888
[   65.252060] Buffer I/O error on device sr0, logical block 91972
[   71.665425] sr 1:0:0:0: [sr0] Unhandled sense code
[   71.665494] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   71.665612] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   71.665815] sr 1:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
[   71.665975] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 67 44 00 00 01 00
[   71.666620] end_request: I/O error, dev sr0, sector 367888
[   71.666690] Buffer I/O error on device sr0, logical block 91972
[   73.656240] ISO 9660 Extensions: Microsoft Joliet Level 3
[   73.842319] ISO 9660 Extensions: RRIP_1991A
[   73.958905] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[   73.964979] aufs 2-standalone.tree-32-20100125
[   73.972175] loop: module loaded
[   74.045668] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[  116.690859] udev[757]: starting version 164
[  117.326810] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[  117.326908] ACPI: Power Button [PWRF]
[  117.334688] Monitor-Mwait will be used to enter C-1 state
[  117.334813] Monitor-Mwait will be used to enter C-3 state
[  117.334862] ACPI Error: No handler for Region [IPMI] (f6c0c0a0) [IPMI] (20090903/evregion-319)
[  117.334869] ACPI Error: Region IPMI(7) has no handler (20090903/exfldio-295)
[  117.334878] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node f6c0b6a8), AE_NOT_EXIST
[  117.334907] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node f6c0b648), AE_NOT_EXIST
[  117.334932] ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20090903/power_meter-772)
[  117.335479] processor LNXCPU:00: registered as cooling_device0
[  117.336129] processor LNXCPU:01: registered as cooling_device1
[  117.336854] processor LNXCPU:02: registered as cooling_device2
[  117.337553] processor LNXCPU:03: registered as cooling_device3
[  117.338262] processor LNXCPU:04: registered as cooling_device4
[  117.338953] processor LNXCPU:05: registered as cooling_device5
[  117.339665] processor LNXCPU:06: registered as cooling_device6
[  117.340365] processor LNXCPU:07: registered as cooling_device7
[  117.341065] processor LNXCPU:08: registered as cooling_device8
[  117.341770] processor LNXCPU:09: registered as cooling_device9
[  117.342507] processor LNXCPU:0a: registered as cooling_device10
[  117.343161] processor LNXCPU:0b: registered as cooling_device11
[  117.343824] processor LNXCPU:0c: registered as cooling_device12
[  117.344471] processor LNXCPU:0d: registered as cooling_device13
[  117.345127] processor LNXCPU:0e: registered as cooling_device14
[  117.345771] processor LNXCPU:0f: registered as cooling_device15
[  117.577917] input: PC Speaker as /devices/platform/pcspkr/input/input5
[  117.719118] ACPI: WMI: Mapper loaded
[  118.755319] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[  120.196068] Error: Driver 'pcspkr' is already registered, aborting...
[  121.080442] device-mapper: uevent: version 1.0.3
[  121.080726] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 3272.385657] usb 1-3.2: USB disconnect, address 4
[ 3283.060778] usb 1-3.2: new high speed USB device using ehci_hcd and address 5
[ 3283.262651] usb 1-3.2: New USB device found, idVendor=1005, idProduct=b113
[ 3283.262655] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3283.262659] usb 1-3.2: Product: FLASH DRIVE
[ 3283.262661] usb 1-3.2: Manufacturer: USB
[ 3283.262663] usb 1-3.2: SerialNumber: AA11122300000558
[ 3283.262742] usb 1-3.2: configuration #1 chosen from 1 choice
[ 3286.251151] Initializing USB Mass Storage driver...
[ 3286.251392] scsi3 : SCSI emulation for USB Mass Storage devices
[ 3286.251591] usb-storage: device found at 5
[ 3286.251594] usb-storage: waiting for device to settle before scanning
[ 3286.251602] usbcore: registered new interface driver usb-storage
[ 3286.251610] USB Mass Storage support registered.
[ 3291.243845] usb-storage: device scan complete
[ 3291.451112] scsi 3:0:0:0: Direct-Access     USB      FLASH DRIVE      1100 PQ: 0 ANSI: 0 CCS
[ 3291.452170] sd 3:0:0:0: Embedded Enclosure Device
[ 3291.453112] sd 3:0:0:0: Failed to get diagnostic page 0x8000002
[ 3291.453118] sd 3:0:0:0: Failed to bind enclosure -19
[ 3291.453193] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 3291.453873] sd 3:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 3291.454480] sd 3:0:0:0: [sdb] Write Protect is off
[ 3291.454484] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 3291.454486] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 3291.456597] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 3291.456602]  sdb: sdb1
[ 3291.459473] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 3291.459478] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 3312.456783] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Jeremy's picture

Not sure if it''s related

But it looks like there is some corruption on the CD you are using to install (from 13 - 71). Perhaps the download got a little corrupted, or perhaps the burning process didn't go quite right? As I say it may not be the cause but it might be...?

Actually I just did a quick google and turned this up - looks like perhaps the broadcom drivers required aren't included in the default Debian installed (and so probably not included in TKL either). I wouldn't bother going through the issues the way they say, I'd just try downloading the deb onto a USB stick, mount the stick in TKL and install the deb with 'dpkg -i'.

I tried that as my HP server

I tried that as my HP server uses Broadcom nics and I got Casper script errors when running the dpkg -i process.  I know the firmware comes from non-free repo.  During install with Debian netinstall cd, if I have the usb stick in the server, it reads the firmware and installs it automatically.  That did not happen with TKL.  I would love to be able to use this in production, but obviously having working nics is essential.  I will use my own Debian build at present...  but it is not nearly as nice as the default TKL install...


Install Drivers for Broadcom 5708 or BCM5708

The HP NC373i use the above broadcom chip , How do i install the drivers n TKL . 

Jeremy's picture

Download and install the deb

Assuming you don't have net access on the machine (because there aren't included drivers for your NIC):

A quick google turned up the deb that looks like the right one (http://packages.debian.org/squeeze/firmware-bnx2 - scroll down to the download section, click 'all', choose a mirror).

Copy it on to a USB stick or removable HDD (best if it's FAT though - NTFS will involve extra steps)

Plug the USB stick into your server and find it:

fdisk -l

(Hint - if you're not sure, run the above before pluggin the stick in and rerun it again after and compare).

It will probably be /dev/sdb1 or something similar (depends what disks you have connected).

Assuming it is /dev/sdb1 - mount it:

mount -t vfat /dev/sdb1 /mnt

cd to where you mounted the USB and install the deb:

cd /mnt
dpkg -i firmware-bnx2_0.28+squeeze1_all.deb

(change that last line if your package is a different version - hint <Tab> complete can save you some typing here).

Then:

reboot

And you should be all good to go! :) 

Thanx

Just started using the File server and SugarCRM , Thanx a ton .

 

Will get in touch for the proxmox support .

Success

Your steps were almost perfect, but I ran into one issue.

When I the tried installing the deb package I got an error about missing casper scripts. The fix for that is to create a link to the scripts in your / directory.

cd /
ln -s /usr/share/initramfs-tools/scripts

Jeremy's picture

I've always just ignored the Casper errors

But thanks for posting back. Always nice to fix errors rather than just ignore them! :)

Post new comment

The content of this field is kept private and will not be shown publicly. If you have a Gravatar account, used to display your avatar.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Allowed HTML tags: <a> <p> <span> <div> <h1> <h2> <h3> <h4> <h5> <h6> <img> <map> <area> <hr> <br> <br /> <ul> <ol> <li> <dl> <dt> <dd> <table> <tr> <td> <em> <b> <u> <i> <strong> <font> <del> <ins> <sub> <sup> <quote> <blockquote> <pre> <address> <code> <cite> <strike> <caption>

More information about formatting options

Leave this field empty. It's part of a security mechanism.
(Dear spammers: moderators are notified of all new posts. Spam is deleted immediately)