title_opnvpn=OpenVPN Administration
title_openvpn=OpenVPN Administration
listserver_title=VPN List
listca_title=Certification Authority List
listactiveconnect_title=Active Connection
index_openssl=OpenSSL
index_openvpn=OpenVPN
index_reconfigurepath=Or reconfigure paths using Module Configuration.
newca_title=New Certification Authority
viewca_title=View Certification Authority
no_data_ca=No data for Certification Authority
ca_ca=Certification Authority
ca_ca_name=Name of Certification Authority
ca_key_config=Complete path to openssl.cnf 
ca_key_dir=Keys directory
ca_key_size=Key size (bit)
ca_ca_expire=Expiration time of Certification Authority key (days)
key_expire=Key expiration time (days)
country=State
province=Province
city=City
org=Organization
ou=Organization Unit
email=Email
error_ca_name_1=Name of Certification Authority too small: min 4 chars
error_ca_name_2=Name of Certification Authority already exists. Remove first before reusing 
error_key_config_1=Complete path to openssl.cnf is required
error_key_config_2=Complete path to openssl.cnf incorrect
error_ca_expire=Expiration time of Certification Authority key incorrect
error_key_expire=Expiration time of key incorrect
error_key_country=State not inserted
error_key_province=Province not inserted
error_key_city=City not inserted
error_key_org=Organization not inserted
error_key_email_1=Email not inserted
error_key_email_2=Email incorrect
error_key_password=Key password too small: min 4 chars
error_key_name_1=Key name too small: min 4 chars
error_key_name_2=Key name already exists. Remove before reuse
tun_or_tap_used=Device already in use: 
version=version
error_correctly_ca=Certification Authority incorrect
name=Name
notes=Notes
verify=Verify
keyslist=Keys list
remove=Remove
list_ca_empty=Certification Authority List is empty
viewca=Certification Authority view
verifyca=verify Certification Authority
removeca=remove Certification Authority
keyslistca=keys list of Certification Authority
ca_removed=Certification Authority removed successfully
newkey_title=New key to Certification Authority
key_name=Key name
key_password=Key password (min 4 chars)
server=server
client=client
key_server=Tipology
list_keys_of_ca=Keys list of Certification Authority
status=Status
revoke=Revoke
revoked=revoked
info=Info
infoca=CA Info
warning_server_pass=Server key doesn't need password!
error23=Note the "error 23" in the last line. That is what you want to see,<BR>as it indicates that a certificate verification of the revoked certificate failed.
removekey=Remove
active=active
expired=expired
viewkey=view key info
index_start=Start OpenVPN
index_restart=Restart OpenVPN
index_stop=Stop OpenVPN
index_startmsg=Start OpenVPN activating all configurations present in OpenVPN home with extension .conf or whatever you choosed in module configuration
index_restartmsg=Restart OpenVPN reactivating all configurations present in OpenVPN home with extension .conf or whatever you choosed in module configuration
index_stopmsg=Stop OpenVPN deactivating all configurations present in OpenVPN home with extension .conf or whatever you choosed in module configuration
index_check=Version Check OpenVPNadmin
index_checkmsg=Check for a new version of OpenVPNadmin
index_updatemsg=<b><font color=red>A new version of OpenVPNadmin is available</font></b>
start_fail=Command Execution Error $1.
stop_fail=Command Execution Error $1.
cmdabsent=Start/Stop commands missing. Verify Configuration.
key_pkcs12=Generate exportable PKCS#12 key
yes=yes
no=no
pkcs12=PKCS#12
export_key=export key
key_pkcs12_password=Password for exporting PKCS#12 (min 4 chars)
error_key_pkcs12_password=Password for exporting PKCS#12 is required (min 4 chars), primary passwd required
create_ta_key=Create ta key for OpenVPN 
remove_ta_key=Remove ta key of OpenVPN
create_ta_keymsg=Generate a random key to be used as a shared secret, for use with the --secret option. This file must be shared with the peer over a pre-existing secure channel such as scp.
export_p12_key=export PKCS#12
normal_key=key
export=Export
zip_fail=Command failed: 
exportkey_title=Export keys for
path_export_key=Complete path of key
path_export_pk2=Complete path of PKCS#12
protocol=proto (Protocol)
port=port (Port)
type=Type
clientlist=Client List
list_vpn_empty=VPN List is empty
viewvpn=VPN view
clientlistvpn=VPN Client List
clientlist=Client List
removevpn=remove VPN
newvpn_server_title=New VPN server
modifyvpn_server_title=Modify VPN server
client_to_server=Server - Client (dynamic)
server_to_server=Peer to Peer
dev=Device
ca=ca (Certification Authority)
cert_server=Certificate Server
key_server=Key Server
choose_server=Choose key
dh=Diffie-Hellman random file
tls-server=enable  TLS  and  assume  server  role during TLS handshake
local=Local host name or IP address
new_vpn_server=Net IP assigns (option server)
network=network
netmask=netmask
ifconfig-pool-persist=Persist/unpersist ifconfig-pool data to file, at seconds intervals (default=600), as well as on program startup and shutdown (option ifconfig-pool-persist)
client-to-client=Because the OpenVPN server mode handles multiple clients through a single tun or tap interface, it is effectively a router (option client-to-client)
duplicate-cn=Allow multiple clients with the same common name to concurrently connect (option duplicate-cn)
tls-auth=Add an additional layer of HMAC authentication on top of the TLS control channel to protect against DoS attacks (option tls-auth)
cipher=Encrypt packets with cipher algorithm (option cipher)
comp-lzo=Use fast LZO compression (option comp-lzo)
max-clients=Limit server to a maximum of n concurrent clients (option max-clients)
persist-key=Don't re-read key files (option persist-key)
persist-tun=Don't close and reopen TUN/TAP device or run up/down scripts (option persist-tun)
verb=Set output verbosity
mute=Log at most n consecutive messages in the same category
status=Complete path of status log file
log-append=Complete path of log file
unassigned=unassigned
go=Go
user=User
group=Group
automatic=automatic
automatic_name=automatic (= name)
automatic_server=automatic (= server)
error_not_ca=Configuration error of Certification Authority
error_vpn_exist=VPN name already exists
error_vpn_notok=VPN name too small: min 4 chars
error_port=In field port only numbers
error_port_used=Port + Proto + IP already used by another VPN
error_network_used=Network used by another VPN
error_max-clients=In field max-clients only numbers
error_netmask=netmask incorrect
error_network=network incorrect
error_choose_server=Error in configuration of server key choosed
modify=Modify
modifyvpn=Modify VPN
modifyclient=Modify client
h_status=Status
disable=Disable
enable=Enable
start=Start
stop=stop
disablevpn=Disable VPN
enablevpn=Enable VPN
startvpn=Start VPN
stopvpn=Stop VPN
disableclient=Disable client
enableclient=Enable client
startclient=Start client
stopclient=stop client
action=Actions
h_port=port
h_protocol=proto
h_local=local
list_server_vpn=VPN server list
list_static_server_vpn=VPN server list with simmetric key
h_ifconfig=local - peer
h_client=Client
h_ca=CA
logs=Logs
log=Log
logvpn=VPN log
logclient=client log
float=float (Allow  remote peer to change its IP address and/or port number)
fragment=fragment (Enable internal datagram fragmentation so that no UDP datagrams are sent which are larger than max bytes)
mssfix=mssfix (Announce  to TCP sessions running over the tunnel that they should limit their send packet sizes such that after OpenVPN has encapsulated them, the resulting UDP packet size that OpenVPN sends to its peer will not exceed max bytes)
tun-mtu=tun-mtu (Take  the TUN device MTU to be n and derive the link MTU from it)
error_mtu=number not valid (100:1500)
chroot=chroot (Chroot to dir after initialization)
view_log_empty=Log file is empty or no results of search
title_log_server_vpn=VPN Logs
view_header=last $1 lines of $2
view_refresh=Refresh
view_filter=View rows with content $1
empty_log=Empty log
empty_logmsg=This operation empties the log, but does not delete it.
adds_conf=Additional Configurations <br>example:<br> push "route 192.168.100.0 255.255.255.0"<br>This parameter adds a route to the client when it's connected
keepalive=keepalive (A helper directive designed to simplify the expression of **ping** and **ping-restart** in server mode configurations)
keepalive_ping=Ping
keepalive_ping-restart=Ping-Restart
h_management=management
management=management (Enable Management)
management_port=Port
management_url=IP
management_enable=Enable
error_management_port=Management port only numbers
error_management_port_range=Management port out of range (1024:65535)
error_management_port_used=Management port used in VPN
commands=PRE/POST UP/DOWN commands
up=up (script execute after VPN up) 
down=down (script execute after VPN down)
up-pre=up-pre (script execute before VPN up)
down-pre=down-pre (script execute before VPN down)
new_client_title=New VPN Client
new_clientmsg=Creation of NEW VPN client
list_client_vpn=VPN Client List
list_client_empty=No client configured
cert_client=cert (Client Certificate)
key_client=key (Client Key)
choose_client=Choose key
error_client_exist=Client name already exists
error_client_notok=Client name too small: min 4 chars
newvpn_static_server_title=New VPN Server with symmetrical key
newvpn_static_servermsg=Creation of new VPN Server with symmetrical key
newvpn_server_titlemsg=Creation of new VPN Server: select the Certification Authority and click New VPN server
error_choose_client=Configuration error in client key choosed
remote=remote (Remote Ip fo the server)
remote_url=IP server
remote_port=Port server
error_remote_url=Ip server obbligatory
modifyclient_server_title=Modify VPN Client
title_log_client_vpn=VPN client Logs
client_removed=client removed successfully
client_ccd_removed=ccd file of client removed successfully
key_removed=key removed successfully
key_revoked=key revoked successfully
vpn_removed=VPN server removed successfully
vpn_static_removed=VPN server with symmetrical key removed succesfully
list_keys_empty=No keys configured
list_keys_server_empty=No server keys configured
list_keys_client_empty=No client keys configured
stop_ok=Command successfull $1
ifconfig=ifconfig (Transport network)
remote=remote (Remote IP)
from=local
to=peer
client=client
newvpn_static_title=New VPN Server with symmetrical key
error_ifconfig_from=Error in parameter local of ifconfig 
error_ifconfig_from_used=Network used in VPN
error_ifconfig_to=Error in parameter peer of ifconfig
error_ifconfig=local and peer must belong to the same network
error_commands=Command error
vpn_static_created=VPN Server with symmetrical key created successfully
error_vpn_remote_port=In field remote port of server only numbers
error_client_remote_port=In field remote port of client only numbers
error_vpn_remote_url=Field remote url of server necessary
error_client_remote_url=Field remote url of client necessary
h_url=IP
client-nat=The client is behind a firewall (NATTED) and is not visible
list_vpn_managed_empty=No VPN with management
virtual_address=Virtual IP
bytes_received=Bytes recevied
bytes_sent=Bytes sent
real_address=Real address
connected_since=Connected since
key_remove=remove key
list_client_connected_empty=No client connected
server_vpn=VPN server
removeclientconnected=Remove client connected
client_disconnected=Client disconnect
client_not_disconnected=The client is not disconnected:
stop_remove=Stop and Disable
view_listactiveconnect=View active connection
client_connected_failed=Connection failed:
listactiveconnect_static=Active connection to VPN server with symmetrical key 
listactiveconnect=Active connection to VPN server
not_info=Is not necessary info, manually check.
no_openvpn_path=OpenVPN executable not found
no_openssl_path=openssl.cnf batch file not found
modified_server=(server modified, save to update clients)
ccd-exclusive=ccd-exclusive (Clients enabled only for this server)
ccdfile=ccd file configurations
ccdfile-content=ccd file content
devbr=Bridge Device
netdevbr=Network Device for Bridge
ifconfigbr=IP config for bridge
ipbr=IP-Address/Gateway
netmaskbr=Netmask
iprangebr=IP-Range for Bridge-Clients
iprangestartbr=Start
iprangeendbr=End
gui_openvpn=Clients availables for 
error_bridge_device=Error in specified bridge device
error_network_bridge_device=Error in specified network device for bridge
error_path_bridge=Path to Bridge-Start or path to Bridge-End or path to Plugin not found
error_ip_range_bridge=IP-range start and/or IP-range end not specified, but needed!
error_ip_start_bridge=IP-range start is wrong!
error_ip_end_bridge=IP-range end is wrong!
error_ip_netmask_bridge='IP for bridge' and/or 'netmask for bridge' not specified, but needed!
error_ip_bridge='IP for bridge' is wrong!
error_ip_notset_bridge='IP for bridge' not set!
error_netmask_bridge='Netmask for bridge' is wrong!
error_netmask_notset_bridge='Netmask for bridge' not set!
error_device_iprange=tun device choosen and iprangestart/iprangeend is set
error_device_bridge=tun device choosen and device for bridge is set
error_device_netmask=tun device choosen and 'Netmask for bridge'/'Netmask for bridge' is set
error_tap_network=Network-Adresse is set and tap device is selected!
error_tap_netmask=Netmask is set and tap device is selected!
error_device=tap device choosen and $1 at $2 is set!
error_bridge_server_1=Choosen 'bridge device' in use by server $1 and IP-addresse differs!
error_bridge_server_2=If you want to use 'bridge device' <b>$1</b> change IP-address to $2!
error_bridge_server_3=Choosen 'network device for bridge' in use by server $1 and bridge device or IP-addresse differs!

