https://www.turnkeylinux.org/forum/Read-only archive of published topics and replies from the legacy TurnKey GNU/Linux forum.en-UShttps://www.turnkeylinux.org/forum/support/sun-20260802-1748/inithooks-23x-starts-confconsole-despite-confconsole-autostart-being/https://www.turnkeylinux.org/forum/support/sun-20260802-1748/inithooks-23x-starts-confconsole-despite-confconsole-autostart-being/Sun, 02 Aug 2026 15:48:32 +0000 Hi TurnKey team, I am seeing behavior with `inithooks` / `confconsole` on a TurnKey LXC container under Proxmox and wanted to confirm whether this is expected. ## Environment - TurnKey appliance running in a Proxmox LXC container - Debian 13 / trixie base - Package versions observed: confconsole 2.2.3 inithooks 2.3.4 Problem Confconsole autostart appears to be disabled, but Confconsole still gets activated by inithooks. The relevant config looks like this: /etc/confconsole/confconsole.conf: # …https://www.turnkeylinux.org/forum/support/fri-20260731-2040/inithooks-package-configure-resets-proxmox-lxc-console-getty/https://www.turnkeylinux.org/forum/support/fri-20260731-2040/inithooks-package-configure-resets-proxmox-lxc-console-getty/Fri, 31 Jul 2026 18:40:21 +0000 Hi TurnKey team, I’m seeing a repeatable console disconnect in a TurnKey LXC container on Proxmox when inithooks is configured via dpkg --configure -a. Environment: Virtualization: lxc OS: Debian GNU/Linux 13 (trixie) Kernel: Linux 7.0.14-3-pve TurnKey app: turnkey-nginx-php-fastcgi-18.0 inithooks version: 2.3.4 turnkey-version: 1.1.3 Hostname: [REDACTED] CT private IP: [REDACTED] Client IP: [REDACTED] Observed behavior: When running dpkg --configure -a, the Proxmox CT console …https://www.turnkeylinux.org/forum/general/mon-20260601-1544/active-project/https://www.turnkeylinux.org/forum/general/mon-20260601-1544/active-project/Mon, 01 Jun 2026 22:44:32 +0000 Very little recent activity Replies (1) Yes, team is bunkering down to do a revamp of TurnKey Reply 1 2026-07-11 Hi Donald, the forum has not been well maintained recently. Team has been focused on a new release / revamp.https://www.turnkeylinux.org/forum/support/fri-20260424-0018/proxmox-usability-concern/https://www.turnkeylinux.org/forum/support/fri-20260424-0018/proxmox-usability-concern/Fri, 24 Apr 2026 07:18:31 +0000 Hey I have a new 'proxmox usability' concern. It has to do with the initial setup of TKL-wordpress. I typically name my local proxmox containers wordpress186.test where 186 is the last octet of my IPv4 on my LAN. I've been doing THAT for years. I think it would be pretty swell if we could SHOW the IP address when we name the machine. But until that happens, I've got a bug with 'tabbing out' from the console in Proxmox to go get the IP address so I can name my machine. i just duplicated this bug …https://www.turnkeylinux.org/forum/general/sat-20260411-1426/apt-error-getting-conconsole/https://www.turnkeylinux.org/forum/general/sat-20260411-1426/apt-error-getting-conconsole/Sat, 11 Apr 2026 12:26:16 +0000 Hi, I use the following line in /etc/apt/sources.list.d/sources.list deb http://archive.turnkeylinux.org/debian bookworm main the apt update works fine: Get:8 http://archive.turnkeylinux.org/debian bookworm-security Release [5686 B] Hit:9 http://archive.turnkeylinux.org/debian bookworm Release Get:11 http://archive.turnkeylinux.org/debian bookworm-security Release.gpg [833 B] Fetched 6519 B in 1s (6676 B/s) but the following apt upgrade brings a 404 error: Error: Failed to fetch …https://www.turnkeylinux.org/forum/support/wed-20260128-1454/suitecrm/https://www.turnkeylinux.org/forum/support/wed-20260128-1454/suitecrm/Wed, 28 Jan 2026 03:54:41 +0000 Hello All, I'm a new user here and was looking for a maintained version of SuiteCRM. Looking to demo it to my bosses so we can get off the old paper systems. I'm new to TurnKey but had been using Bitnami until late for similar maintained apps. Replies (6) I'm no SuiteCRM expert. Reply 1 2026-01-28 I'm no SuiteCRM expert - my knowledge tends to be generic and broad rather that application specific. Although I'm intimately familiar with TurnKey and having said that disclaimer in my …https://www.turnkeylinux.org/forum/general/thu-20260108-0742/turnkey-trixie-lcx-containers/https://www.turnkeylinux.org/forum/general/thu-20260108-0742/turnkey-trixie-lcx-containers/Thu, 08 Jan 2026 06:42:03 +0000 hi all my collegue have set up for us a proxmox server and he set up some turnkey appliances..it was easy for him and working for us.. everything is working out of the box.. so big thank you for your work. Now my collegue is busy and i tried to upgrade proxomox from 7 to up to date ..which went fine.. but i have issues with lcx containers where apt is saying that pgp keys are invalid. unfortunately i listened to chatgpt and tried with him to update pgp keys so i might as well destroy original …https://www.turnkeylinux.org/forum/general/thu-20260101-2050/update-webmin/https://www.turnkeylinux.org/forum/general/thu-20260101-2050/update-webmin/Thu, 01 Jan 2026 18:50:37 +0000 Hello Jeremy, It seems the core turnkey package and the Nginx package have different versions of Webmin. The core version includes the xterm module Which is very useful because this appears in the webmin interface and I can go to the command line. However, the NGINX Appliance is a slightly older version of Webmin. 2105 vs 2102. When I try to update Webmin 2102 via apt-get install webmin it says currently up to date. Can you advise how to update Webmin so that I can use the terminal module, …https://www.turnkeylinux.org/forum/general/mon-20251222-2002/there-any-way-manually-approve-email-address-change/https://www.turnkeylinux.org/forum/general/mon-20251222-2002/there-any-way-manually-approve-email-address-change/Tue, 23 Dec 2025 04:02:01 +0000 I just installed the wordpress app via Proxmox helper scripts. I was prompted for an email address using the confconsole setup. but then, once I was logged in, I was prompted to 'Verify Admin Email'. Even though I had clearly entered myemail@somedomain.com, I am still being prompted saying that the admin email is admin@example.com I haven't setup DNS or email for this site, but I'm working on it. I just don't understand why entering myemail@somedomain.com I don't understand why that didn't fix …https://www.turnkeylinux.org/forum/support/thu-20251120-1729/delete-account/https://www.turnkeylinux.org/forum/support/thu-20251120-1729/delete-account/Thu, 20 Nov 2025 16:29:16 +0000 Please delete my account, i no longer need it Thank You! Replies (1) No problem - I'm doing it now Reply 1 2026-01-12 No problem - I'm doing it now. You won't hear from us any more... :)https://www.turnkeylinux.org/forum/general/fri-20251031-1220/download-firefox-security-risk-warning/https://www.turnkeylinux.org/forum/general/fri-20251031-1220/download-firefox-security-risk-warning/Fri, 31 Oct 2025 10:20:53 +0000 I have been using Turnkey for years Never had a problem. Today attempted to download the domain controller appliance and Firefox prevented the download due to a security risk. Is this Firefox being a member of the Nanny state or is there genuinely risk? Thanks Replies (1) Sorry about ridiculously slow reply... :( Reply 1 2026-02-23 Hi there, TBH I'm not sure how I managed to miss this post from months ago? Regardless, deep apologies. To answer your question, I can not reproduce the issue you …https://www.turnkeylinux.org/forum/support/wed-20251029-1247/am-i-allowed-use-anothet-gpl-repo-tkl-iso/https://www.turnkeylinux.org/forum/support/wed-20251029-1247/am-i-allowed-use-anothet-gpl-repo-tkl-iso/Wed, 29 Oct 2025 11:47:17 +0000 Long story short. I made a little script to fix permissions for Moodle and it turns out that it is useful tu use it also for turnker-moodle. As it needs little adaptations to be included in tkl main (and also as it can be useful also for the installed machine if you mess up something), am I allowed to download and run it directly form a the repo? something like: git clone MYREPO -o /scripts chmod +x /scripts/MYSCRIPT /MYSCRIPT -p1 -p2 -p3 Replies (10) Hi Uncle Dan, sorry for such a slow …https://www.turnkeylinux.org/forum/support/tue-20251021-1219/turnkey-moodle4-181-bookworm-amd64-release-candidate/https://www.turnkeylinux.org/forum/support/tue-20251021-1219/turnkey-moodle4-181-bookworm-amd64-release-candidate/Tue, 21 Oct 2025 10:19:06 +0000 I had to build TurnKey Moodle which is quite outdated. Having an issue on moosh download, I switched to getting sources via git, as suggested here: https://docs.moodle.org/501/en/Git_for_Administrators#Obtaining_the_code... 4.5.7+ installs and works ok. 5.0.1+ builds and installs but it is not "workable" moodle4 (re-check and fix against 18.1, same major version) Status: Builds OK. Login OK. Versions: Versione 4.5.7+ (Build: 20251017) as of today / TurnKey Linux 18.1 Pull request: …https://www.turnkeylinux.org/forum/general/fri-20250912-2045/any-eta-turnkey-19-debian-13-trixie/https://www.turnkeylinux.org/forum/general/fri-20250912-2045/any-eta-turnkey-19-debian-13-trixie/Fri, 12 Sep 2025 18:45:48 +0000 Hello, im just wondering what is time span for TK 19. For me most importantly Nextcloud. Just to know and plan. Thnak you for everything. Replies (4) Sorry for such a slow reply... Reply 1 2025-10-09 The short answer is very soon I hope! Although "soon" will likely be longer than any of us would like... The longer answer is that I'm currently squirreling away behind the scenes trying to get everything in place (hence why this reply is so late). I've had a few wins over the last few days so I …https://www.turnkeylinux.org/forum/support/wed-20250827-0455/openvpn-181-issues-setting-static-ipconnections-dhcp/https://www.turnkeylinux.org/forum/support/wed-20250827-0455/openvpn-181-issues-setting-static-ipconnections-dhcp/Tue, 26 Aug 2025 18:55:23 +0000 I'm having some issues with the 18.1 ISO release: When attempting to set a static IP on a new install via confconsole I receive "Unexpected config line post-up iptables restore /etc/iptables.up.rules" - upon exiting and re-entering the console/IP settings the default gateway is absent, they only way for the appliance to be usable is to set DHCP and reboot. (wether I chose to update during the install process makes no difference.) Also when using DHCP the appliance appears not accept to …https://www.turnkeylinux.org/forum/support/fri-20250725-1220/fyi-there-seems-be-issue-openvpn-181-iso/https://www.turnkeylinux.org/forum/support/fri-20250725-1220/fyi-there-seems-be-issue-openvpn-181-iso/Fri, 25 Jul 2025 17:20:14 +0000 Hello, I am using an HPE DL20 G9 server with 8GB of RAM and 120GB SSD (SATA). The OpenVPN 18.1 ISO boots but then seems to reboot about 20 seconds after I select "install to hard disk." I thought maybe there's corruption during my download so, I downloaded the ISO two times on different PC just to make sure the ISO was not corrupted. I downloaded OpenVPN 17.1 ISO and was able to complete the installation without any issue. Thank you Replies (1) Apologies for such a slow reponse Reply 1 …https://www.turnkeylinux.org/forum/support/mon-20250721-1754/unable-access-web-page-roundup-tracking-system-main-page/https://www.turnkeylinux.org/forum/support/mon-20250721-1754/unable-access-web-page-roundup-tracking-system-main-page/Mon, 21 Jul 2025 14:54:00 +0000 Hello. I have gone through the motions of installing the Roundup v18.0 appliance as a virtual machine. However, when I bring up a web browser to go the default page, I get the example.com website as opposed to the index page of the application. How can I correct this issue? Replies (8) Can you ping the server? Have you tried clearnign cookies? Reply 1 2025-07-23 Just to be clear, the hosts file change needs to happen on the desktop/laptop PC you are trying to connect from - not the Roundup …https://www.turnkeylinux.org/forum/support/wed-20250716-1026/turnkey-16-and-debian-buster-updates/https://www.turnkeylinux.org/forum/support/wed-20250716-1026/turnkey-16-and-debian-buster-updates/Wed, 16 Jul 2025 14:26:14 +0000 Hi, Jeremy, We're running Version 16.0 of an appliance, and we recently received this error: CRON-APT RUN [/etc/cron-apt/config]: Wed Jul 16 00:10:01 UTC 2025 CRON-APT SLEEP: 1002, Wed Jul 16 00:26:43 UTC 2025 CRON-APT ACTION: 0-update CRON-APT LINE: /usr/bin/apt-get -o quiet=1 update -o quiet=2 E: The repository 'http://deb.debian.org/debian buster Release' no longer has a Release file. E: The repository 'http://security.debian.org buster/updates Release' no longer has a Release file. I …https://www.turnkeylinux.org/forum/support/mon-20250707-1801/owncloud/https://www.turnkeylinux.org/forum/support/mon-20250707-1801/owncloud/Mon, 07 Jul 2025 18:01:57 +0000 When trying to update Owncloud for cmd I get the following error GPG error: https://packages.sury.org/php bookworm InRelease: The following signatures were invalid: EXPKEYSIG B188E2B695BD4743 DEB.SURY.ORG Automatic Signing Key E: The repository 'https://packages.sury.org/php bookworm InRelease' is not signed. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. …https://www.turnkeylinux.org/forum/support/fri-20250620-1617/fileserver-ntstatusnosuchgroup/https://www.turnkeylinux.org/forum/support/fri-20250620-1617/fileserver-ntstatusnosuchgroup/Fri, 20 Jun 2025 14:17:49 +0000 Hi, I've been trying to get the fileserver to work for over 3 days now. I've tried many settings, howto's, forums and AI's but nothing helps. I have 2 users and 2 groups. User admin is member of samba-rw and user archief is member of samba-ro. The share is chowned root:samba-rw and chmodded 2775 for directories and 644 for files. If I don't use the setting: force group = samba-rw everything works and I can log on, but I can't write as user admin. If I enable force group = samba-rw I can't even …https://www.turnkeylinux.org/forum/support/tue-20250617-1159/lets-encrypt/https://www.turnkeylinux.org/forum/support/tue-20250617-1159/lets-encrypt/Tue, 17 Jun 2025 01:59:15 +0000 Hi there. I've been having issues with Let's Encrypt via the dns-01 method in confconsole and am looking for help. Replies (14) Hi Matthew, could you please provide some more info Reply 1 2025-06-17 Hi Matthew, could you please provide some more info. Are you getting specific errors? Or is it just not working? Or something else? Lexicon, Cloudflare, and dns-01 Reply 2 2025-06-18 Thanks for replying. Here's what I've found out so far. For whatever reason, I think the auth_token isn't working …https://www.turnkeylinux.org/forum/support/mon-20250609-1111/what-default-state-tklbam-new-server-eg-wordpress-server/https://www.turnkeylinux.org/forum/support/mon-20250609-1111/what-default-state-tklbam-new-server-eg-wordpress-server/Mon, 09 Jun 2025 01:11:49 +0000 Hi Jeremy, I am attempting to configure some WordPress related Fail2Ban rules and not yet having much success (I have configured the rules as per spec / online examples but the rules have no effect). I will plug away at it but it would be helpful if I had a couple of answers to some context questions. Q1: Is Fail2Ban / Linux Firewall (IpTables) enabled by default? I have configured some Fail2Ban rules that trigger an IP address block using "action: iptables-allports" but don't see the rule in …https://www.turnkeylinux.org/forum/support/sat-20250607-0934/turnkey-domain-controller-rodc/https://www.turnkeylinux.org/forum/support/sat-20250607-0934/turnkey-domain-controller-rodc/Sat, 07 Jun 2025 06:34:15 +0000 I had TKDC as AD for a while. So far so good. Now I want to deploy a second TKDC as a read-only domain controller. Is there any guide/doc on this? I was stuck at kinit: Cannot find KDC for realm "MY.DOMAIN" while getting initial credentials when trying to simply add a second instance to the domain. Perhaps I could resolve this issue, but that leaves me with a question: "Am I even on the right way?" Will there be an option for RODC later? So here I am, looking for help/advice. Replies (1) …https://www.turnkeylinux.org/forum/support/thu-20250605-1114/multiple-vms-incorrectly-backing-same-file-they-have-same-backupid/https://www.turnkeylinux.org/forum/support/thu-20250605-1114/multiple-vms-incorrectly-backing-same-file-they-have-same-backupid/Thu, 05 Jun 2025 01:14:03 +0000 Hi Jeremy, I have multiple VMs incorrectly backing up to the same file. They have the same BackupID#. What is the BackupID# derived from...the Linux ServerName? Thanks in advance...much appreciated :-) Replies (2) TKLBAM backup ID is generated by tklbam-init Reply 1 2025-06-05 The TKLBAM backup ID, the AWS S3 URI and other server/backup specific stuff are generated by the Hub and/or TKLBAM when you run 'tklbam-init'. The data related to the backup ID (and S3 URI, encryption keys, etc) is all …https://www.turnkeylinux.org/forum/support/fri-20250509-1858/zoneminder-time-server/https://www.turnkeylinux.org/forum/support/fri-20250509-1858/zoneminder-time-server/Fri, 09 May 2025 22:58:31 +0000 I'm using two network interfaces for Zoneminder - one for the VM and another for the cameras. What's the best way to get my camera interface to query my VM interface for NTP? Do I have to install ntpd or chrony? Thanks Replies (5) It wasn't much help this time, but you're welcome :) Reply 1 2025-05-22 It wasn't much help this time, but you're welcome :) Thank again for your Reply 2 2025-05-20 Thank again for your responses. Much appreciated! - Chris Ah, so you want to use your TurnKey …https://www.turnkeylinux.org/forum/support/thu-20250501-2044/start-service-boot/https://www.turnkeylinux.org/forum/support/thu-20250501-2044/start-service-boot/Thu, 01 May 2025 17:44:33 +0000 I have installed the stalwart-mail https://github.com/stalwartlabs email server on a postgres appliance. There is a service present in /etc/systemd/system/stalwart-mail.service. However I cannot figure out how to launch the service at start-up. I've tried systemctl enable stalwart-mail.service but this did not work. Is there something specific I have to do for a turnkey appliance? Thanks Paul Replies (5) Hi Paul, it should "just work" Reply 1 2025-05-06 Assuming that 'systemctl start …https://www.turnkeylinux.org/forum/support/sun-20250427-2202/error-while-certificating-through-http-01/https://www.turnkeylinux.org/forum/support/sun-20250427-2202/error-while-certificating-through-http-01/Sun, 27 Apr 2025 20:02:40 +0000 Hello, i'm getting this error here: [2025-04-27 21:55:33] dehydrated-wrapper: FATAL: Dehydrated not installed, or not in the $PATH tee: '': No such file or directory Failed to mangle name: Invalid argument Failed to expand names: Invalid argument tee: '': No such file or directory Can you help me? I'm using Turnkey-nextcloud iso, debian bookworm, updated to the last version. Replies (7) Hi BFF, glad you resolved it Reply 1 2025-04-28 Hi BFF, I'm glad that you resolved it, but I wouldn't expect …https://www.turnkeylinux.org/forum/support/fri-20250425-1630/espocrm-export-import-tool/https://www.turnkeylinux.org/forum/support/fri-20250425-1630/espocrm-export-import-tool/Fri, 25 Apr 2025 21:30:33 +0000 Hello all, I'm running turnkey-espocrm-17.1-bullseye-amd64. I've installed the espocrm export-import tools but it does not seem to work. -bash: export-import: command not found https://github.com/espocrm/ext-export-import/releases Is there anything about the Turnkey Linux OS that would keep this from exporting? Thanks! Replies (1) Are you running it in the EspoCRM directory? Reply 1 2025-04-28 There is nothing in TurnKey that should stop that from working. And as you haven't shared the exact …https://www.turnkeylinux.org/forum/support/wed-20250423-1247/tracks-mariadb-only-runs-once-version-18-iso/https://www.turnkeylinux.org/forum/support/wed-20250423-1247/tracks-mariadb-only-runs-once-version-18-iso/Wed, 23 Apr 2025 16:47:09 +0000 I have been a huge fan of /tracks for quite a while. i am trying to setup a new instance using version18.0 of the ISO. i am having issues with MariaDB. it seems it will only run one time, and as soon as you either reboot the appliance, or restart MariaDB it will no longer start. I have followed this thread extensively, and unfortunately i am still having the issue: /forum/support/tue-20240430-1614/cant-get-re... When i try and restart MariaDB, i get the error below, it seems the issue is with …https://www.turnkeylinux.org/forum/general/tue-20250422-1404/turnkey-linux-account-approval/https://www.turnkeylinux.org/forum/general/tue-20250422-1404/turnkey-linux-account-approval/Tue, 22 Apr 2025 04:04:24 +0000 Welcome to TurnKey Linux! :) TurnKey Hub API key If you want a TurnKey Hub API key, please sign up over there (website and Hub accounts are separate). Signing up to the Hub will give you a free 14 day trial of our remote, encrypted Backup system (aka TKLBAM) and/or our Cloud servers. Note that signing up to the Hub requires an AWS account. We do hope to support alternate cloud providers in the future, but currently all the services provided by the Hub are backed by AWS services. To allow the …