Forum archive tag
282 matching pages
Forum archive
I've been doing a TON of troubleshooting on this issue, and I'm stuck. The Long-Story-Short version is this: I've been able to install the official Microsoft ODBC drivers, and …
Forum archive
Over on Reddit, u/Solnse asked about setting up a LAMP/LAPP appliance to host multiple sites via different domains. AKA "name based virtual hosts". I've tried 3 times to post this …
Forum archive
I am trying to set up some monitoring of my turnkey appliances. I located a webmin monitoring solution. However, I get an error that the Perl Module is not installed. This is not …
Forum archive
Hello Probably a newbie question... I have just deployed a Turnkey Appliance for Bookstack and it is woking nicely. I however see in my SMTP relay server a number of - blocked - …
Forum archive
Hello, At this moment i try to migrate my website from Xampp to Turnkey version 17.1. I ran into an issue to replace the SSL certificate which i am using now on Xampp. …
Forum archive
I'm needing to upgrade php7.4, which is now deprecated, to php8.1 on LAMP stack, Joomla4 Stack, orangeHRM stack, etc. I'm new to linux, and love turnkey approach. It's slick. Can …
Forum archive
Did a bit of flailing trying to get a LAMP image to build with PHP 8.1 from Sury out of the box. It's now building but I haven't yet tested anything out. Currently in the 'lamp8' …
Forum archive
I am running TurnkeyLinux v17.1 Prestashop. I installed in a virtual machine 4-6 months ago. Recently, my certificate renewal stopped functioning. I am not aware of any changes to …
Forum archive
I have loads of containers running under Proxmox for many years with no issues, have tried recently to add a load more LAMP containers, and can't get any of them to work, despite …
Forum archive
Hello and please forgive me if this is answered elsewhere, I've searched but... still haven't found what I'm looking for ;-) First, let me say I've been using Turnkey products for …
Forum archive
I've been using TKL images in virtualbox for years now. I recently decided to explore running in a docker container instead. I'm very new to docker and container virtualization so …
Forum archive
Good day everyone, This is a very useful and powerful setup that I like a lot. I have been using it for a while, to make it work on VirtualBox, it needed to get the IP from DHCP …
Forum archive
I’m having an issue I can’t solve. I have a number of Wordpress sites running on a TKL LAMP instance. If the root page is requested, or the link/manually typed URL includes https, …
Forum archive
I am experiencing very strange behavior on one of my new LAMP servers. This may not be Turnkey specific but I figure I'd start here and see if you all have any ideas! Here's what …
Forum archive
i want to choose a file via input type file at my home.php -> action to my upload.php script and reading data to transfer them into mariadb it works if i set an absolut path to …
Forum archive
refer the heading above i would like to know how the VMs networking works and also how have you made the webshell be accessed like that on the browser also i see a lot of VMs use …
Forum archive
Please ignore - rookie mistake. Replies (2) Glad you worked it out! :) Reply 1 2021-05-26 Hi Eric Glad to hear that you worked out the issue and are all good for now. Please don't …
Forum archive
Hi All, I am very new to this, and I am planning to use my own generated self-signed certificate to replace the default SSL certificate but I can't seem to the directory. Also, …
Forum archive
Getting back after 3 years to this site to check DB status, I missed the adminer interface. - from Firefox: get error: SSL_ERROR_RX_RECORD_TOO_LONG - from Chrome: SSL Error - from …
Forum archive
Hello, I use Turnkey's Wordpress VM. In WP I added a theme and treid to set up some pages. Now my WP crashes, when I try to work on a page. Therefore I changed the following …
Forum archive
Can't run TKLBAM on my LAMP 16.1 server...it kills MySQL (well MariaSQL). LAMP server with WordPress installed (backs up the WordPress MySQL fine...it fails on the MySQL db …
Forum archive
Hi, I'm using a customized turnkey lamp 14 on my server. I have now upgrade this to debian 9 (stretch) and after to debian 10 (buster). It seems to work well. But the confconsole …
Forum archive
I have set up a lamp appliance on an ESXi server using the OVA VM format. The OVA was configured with one CPU and 512 MB ram. I am hoping to improve the performance of the VM. The …
Forum archive
Cannot load web gui for next cloud using tunrkey nextcloud 16 after first install. I am unable to start webmin service errors I have are stunnel4@webmin.service: Start request …
Forum archive
Can the php version be upgraded on the image? atleast to 7.2? Replies (1) Hi Mike, apologies on slow response Reply 1 2020-03-31 Sorry for the slow response. FWIW we're currently …
Forum archive
I have written a PHP task/job scheduler... it fires off jobs which are PHP scripts that perform various tasks. Currently its working pretty well, but every now and again I find …
Forum archive
Hello! I'm trying to enable users and groups quotas on my LAMP stack. Webmin says: No local filesystems can support quotas. You can enable quotas for a filesystem in the Disk and …
Forum archive
I use the LAMP Stack as a vmware virtual machine. Is there any method to reduce the root partition size? The default virtual HDD size is 20 GB, but the 90% is free. I need only …
Forum archive
Hi, can somebody give me a hint, how I can update libssh2 to 1.7 or higher on Turnkey Lamp Stack 14? Thanks for help! Replies (2) Argh, I'm sure I wrote a response to this …
Forum archive
Hello I have a little Problem with my LAMP installation. I want to open the MYSQL port 3306 to work from outside the server. I started webmin and went to network -> firewall. …
Forum archive
Install NO-IP DNS Client on TURNKEY LAMP: 1. Go to Shell Box: apt-get install build-essential gcc -y cd /usr/local/src wget http://www.no-ip.com/client/linux/noip-duc-linux.tar.gz …
Forum archive
Good morning, afternoon or evening to the entire turnkey Linux community. A few days ago I was testing LAMP to install a WordPress blog, and I came up with the idea of upgrading …
Forum archive
Howdy! Thanks so much for providing this excellent platform, we use TurnkeyLinux boxes in production all day every day. Cutting to the chase.... I have a LAMP instance hosting an …
Forum archive
not able to install from apt-get install GD any help? on this would be great Thanks Replies (1) Hi there... Reply 1 2019-07-08 Do you mean the GD library bindings for PHP? Or some …
Forum archive
Hello, First, I'll say I am no Linux guy by any stretch, so if this is a non-issue, I'm sorry for creating a false positive thread. When I ran chkrootkit on an existing LAMP …
Forum archive
I would like to change the port of Webmin(Port 12321) to a port of my choice but I can not find where the port settings are located. When I go to look at the Webmin ports in the …
Forum archive
Good Morning All, I have just installed the Lamp Stack from a ISO image onto a physical machine to hoepfully use. Everything seems to have installed correctly in terms on the …
Forum archive
I do not know what has happened but my server has lost the apache configuration and it is not possible to make it work. Is there any way to restore my apache configuration to the …
Forum archive
Hi Folks, I've been working with the LAMP server and successfully added Samba so my developer can drop files into the web folder to test. I needed to change the server to work on …
Forum archive
This weeks automatic security update to LAMP killed MariaDB. Symptoms: root@Node2 ~# mysql -u root -p -e "show status like 'wsrep_cluster_size'" Enter password: ERROR 2002 …
Forum archive
It's been too long!! I haven't setup an apache server in quite some time and since all of my sites are on an old server running php 5.6, I thought it may be time to upgrade the …
Forum archive
Hey guys, Having a hell of a time trying to get LAMP and OpenDC up into AWS. I provisioned the OVA's into vCenter with no issue, and even set up the initial configuration. When I …
Forum archive
Ok... Ive been using TKL for years.. but still consider myself a total noob when it comes to linux and TKL operations. The Latest build V15 has Webmin like V14... but look very …
Forum archive
Good Morning! I currently run a Turnkey LAMP Stack server on my network. It hosts a few websites. It's done well for the past 3 years and I hardly ever have to pull up the server …
Forum archive
Hi, I use the turnkey lamp and have problems to enable compression by mode_deflate on a apache2 server. I don't have any idea why it is not working: Modules are enabled: # …
Forum archive
Hi, when I am try upgrade all packages, then this info coming to me: Show sidebar » Resynchronizing package list with command apt-get update .. Hit http://security.debian.org …
Forum archive
Ok... I have been using Turnkey LAMP stack in production for years now. This has happened in the past but not often enough for me to even warrant looking into until today. …
Forum archive
I have been running a Turnkey LAMP appliance on Virtualbox on Win 7 for several months for web development. However today for some reason the MySql instance failed to start. The …
Forum archive
Hi, everyone, I know this is a pretty basic task, but despite having web development/design experience, I am struggling to configure a local web server using Turnkey LAMP. I want …
Forum archive
Hello All, First post here and new the Linux world. I am running WordPress with PHP5.6, can anyone please tell me how to upgrade to PHP7.0 ? Thanks C Replies (10) Personally, …
Forum archive
Hi, Newbie here and I'm using TurnKey's Lighttpd - which is awesome! But, I have a issue when it comes to my game server using it as a fast download server, it won't let the …
Forum archive
My first effort. https://github.com/Ozgurujim/slims8 Kick it about , pull it apart etc etc if you are a developer. If you're a librarian end-user, give feedback on how it can be …
Forum archive
Hi there, I posted this over in the confconsole docs as a comment, but I guess the forums are better monitored? Anywho, to recap: OK, I may be missing something obvious but I …
Forum archive
Hi All I'm currently running LAMP Stack (version 14.1 - Jessie) which came loaded with Webmin version 1.780. Since the install I've been trying to install standard Webmin modules …
Forum archive
Hello, I installed the server lamp and I do not understand how the server works and the interactions between apache and webmin. If I connect to the url of the server, I access a …
Forum archive
Hey Guys, After running some years on turnkey magento debian linux 7, hosting multiple websites as follows: in /var/www i am running the magento site ( default setup of turnkey …
Forum archive
Hello, I have set up observium and all graphs are working well. Now I am trying to set alerts for server load, mailqueue threshold, services alerts ( ex : httpd, exim etc ). Can …
Forum archive
Hi, i have install google chrome for headless testing with watir on ruby. The installation is very easy: sh -c 'echo "deb http://dl.google.com/linux/chrome/deb/ stable main" …
Forum archive
Hello everyone. I am installing considering installing Turnkey Linux on a computer I am reporposed as a server. I have tried multiple other options, but they are either beyond my …
Forum archive
Hi, how can i install a simple X and window manager and GTK or other x-related libraries? Which repositories are neccessary to append at apt.lists? Thanks for help. Replies (3) …
Forum archive
Hi, has anyone experiences to get SeleniumHQ or Watir running on a Turnkey Lamp? I just install ruby and ruby-dev and the watir-webdriver or selenium-webdriver. But it is not easy …
Forum archive
What is wrong with mollom? I just created a new post with some questions and it got flagged as SPAM? EDIT: Figured it out. Mollom won't let me type in subdomainDOTdomainDOTcom …
Forum archive
Hello, I am trying to do a tklbam-restore to a Docker turnkeylinux/lamp-14.1 test container. The restore is failing for some reason, as indicated in the attached log file. If I …
Forum archive
Hello, I need to upgrade from our current Turnkey 12 in which we have MediaWiki installed to the latest Turnkey 14 which supports the latest PHP version needed for the latest …
Forum archive
Hi, i use phantomjs to shot many website screens. Since 22/06/2016 sometimes phantomjs hangs and is waiting for incoming data. I don't know why? After killing phantomjs and …
Forum archive
Any plans to work on a OSTicket Turnkey Linux? Thanks http://osticket.com/ Replies (2) Only vague ones... Reply 1 2016-06-14 We'd love to see OSTicket and tons of other cool …
Forum archive
Hi, How canI I upgrade to php 7 in LAMP? Thanks, Hannes Replies (1) No supported way... Reply 1 2016-06-06 Only php5.6 (from Debain repositories) is supported on TurnKey. Under …
Forum archive
I am trying to get Ryan's In/Out Board (http://www.equitasit.co.uk/products/ryansiob) running on TurnKey LAMP server and failing miserably. I keep getting an Internal Server Error …
Forum archive
OK, I figured it out. Please ignore. ============================ I am trying to move an application I developed over two yeas ago from LAMP 13.0 to 14.1. I have setup a new 64 …
Forum archive
I cannot create files in PHP using my LAMP VM. When I upload the site to my web host however everything works fine. I know that it's possible to enable this functionality in my …
Forum archive
Note: this was originally a support question but as often happens, I solved my own problem. I was able to successfully upgrade to MySQL 5.7 and for other's who may be interested, …
Forum archive
Hi all, I am trying to upgrade my lamp installation to PHP 7. Therefore I also try to remove php5. However, when purging php5 packages adminer is also uninstalled. Is it safe to …
Forum archive
Download several ISO files and install them in VM (VirtualBox), but something goes wrong because the credentials you entered in the installation wizard do not work. Does anyone …
Forum archive
Just fired up the LAMP Stack - Web Stack (MySQL) provided by TurnKey Linux instance and can't connect to the MySQL database from my ofice using MySQLWorkbench. I want it open to …
Forum archive
Hello, Just tried to install virtualmin on current 14.0 LAMP and get as follows. See below. Has anyone got virtualmin running ? debconf: delaying package configuration, since …
Forum archive
Hi, i ve got many times this kernel log message: Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev- instead I think …
Forum archive
(I originally posted this on ServerFault but thought I'd post it here as well. Here's the original: …
Forum archive
I downloaded the ova file and created a VM for the Turnkey Linux Lamp Stack. It's currently sitting, waiting to become my production web server. I was only able to use the 20Gb …
Forum archive
Running the latest LAMP on Virtualbox. With Adminer, I can't see any links/buttons to use to import a database. Am I missing something, or isn't import available with Adminer …
Forum archive
In TK14 pfpMyAdmin is replaced by Adminer version 3.3.3. Why the choice for such an old version? That version was released on August 12, 2011. Adminer version 4.2.0 was released …
Forum archive
Hey, friends, first of all: I'm a newbie to TKL. I started to work with it a few weeks ago. I installed the LAMP-stack (14.0) to a standard-pc for testing it. Everything worked …
Forum archive
Does anyone store their server configuration in git? It seems to me it would be a good way to keep a history of changes made to a server. There are a few things I'm concerned …
Forum archive
Hi, the default TKLBAM backup frequency is once a day. I run a social platform on top of the LAMP appliance and once a day is not enough, given the activity on this platform. Is …
Forum archive
I am pretty new to the scenario of LAMP. I am trying to create a multiple server lamp stack i.e. 3 linux servers with one of A,M,P (Linux+ Apache, Linux + Mysql, Linux + php) I …
Forum archive
Hi I recently installed tkl LAMP on AWS. Webmin and phpmyadmin were working well until I installed and uninstalled the iredmail mail server. I think it reset the default tkl …
Forum archive
I've been unsuccessful at downgrading PHP 5.6 to PHP 5.3 or 5.4 on the LAMP Debian 8 Jessie turnkey install. I've been using LDAP plugins with WordPress, and the plugins don't …
Forum archive
HI, I've some issues with recieving mail recieved through POSTFIX. I 'm running a ticket system, on a turnkey LAMP appliance. Mails sendt to our support mailbox is recieved by …
Forum archive
Hi I installed Version 14.0 LAMP Stack on a MS Hyper-V-Cluster. Then transferred an existing phpBB-board and updated it to the latest version (3.1.6). Everything works fine except …
Forum archive
Hello Everyone, I sucessfully got my Turnkey Linux LAMP stack up and running with the latest updates/upgrades. Managed to install VMware Tools and the latest Webmin 1.760. I also …
Forum archive
Hello, Once again, I need your help. I just hope this is the appropriate place for this. If not, let me know and I'll move the message. I have set up LAMP on a server, which is …
Forum archive
Hi, I have am running Debian v7 and Apache 2.2.22. I need to get this upgraded to the latest version 2.2, but when I do apt-get update && apt-get dist-upgrade all I see is …
Forum archive
Hi, I am having issues connecting to mysql from a python script. LAMP setup successful. Logged on and created necessary databases and enabled access. I receive the following error …
Forum archive
Hi All, I currently have several TKL LAMP instances deployed and I am working on setting up high availability for them. Currently, I use tklbam to back them up and if the primary …
Forum archive
I'm running a turnkey lamp v12, and had a working tklbam set up before. I had cancelled my current account linked to my key, and created a new one. I know you use tklbam-init …
Forum archive
Hi all, I think I messed up. I am running LAMP and SPToolkit on an HP Prolient DL380 G5 and everything was working fine until I upgraded Debian from Wheezy to Jessie. In …
Forum archive
Lamp 13 (downloaded this evening) ovf imported into VirtualBox 4.3.26 on MacOS X 10.10.3. The imported appliance doesn't get past: Loading Linux ... Loading initial RAMdisk First …
Forum archive
Hello, Created LAMP server with TURNKEY in Virtualbox. I installed Joomla and Moodle to integrate joomla + Moodle with a component called joomdle. I did all the steps correctly, …
Forum archive
Hi, Having recently migrated a site from a Windows platform to a Linux platform I found it necessary to throw some notes together to use the next time the need to do such a thing …
Forum archive
Ok, we run a growing auto parts shopping cart. Our server runs slow and is always crashing so we asked our web host to assist us. They sent us these report but I need some advice …
Forum archive
Hi, I'm a noob who needs help getting LAMP to work on my DL380 G5. Apparently, the nic drivers are not on the lamp iso. I installed the bnx2 drivers, thinking mine might be on …
Forum archive
I downloaded a clean copy of VirtualBox and the newest LAMP VM. Everything installed correctly and nicely as far as I can tell. I can import the OVF just fine. When I run it, it …
Forum archive
Hi guys, Trying to launch an instance using Turnkey hub, I've signed upto the Pay per use plan and activated it on Amazon. But soon as I press Launch I receive the following …
Forum archive
Hallo.. I want to know to prepare the server and program development in order to become a server sends millions of emails at the same time a product to customers ? Thanks. Replies …
Forum archive
Hi I have just installed the LAMP stack. Hurray! Could someone help me on how to get domains up and running on the webmin? it is for only for testing so the domains will be like …
Forum archive
Hi guy's, First of all a well deserved Well Done with TKL it saves me a lot of time is a great addition for us. Well I have a problem since most clients only have 1 server and 1 …
Forum archive
Hi all, Is there a way to reset Turnkey back to the initail installation state? I had issues with webmin not showing the modules for appache, followed a guide, and now I get 502 …
Forum archive
Hello Everyone, I am trying to update and install memcache on my zurmo VM. I can run apt-get update and it works fine then i try install-security-updates and ui get the following …
Forum archive
I have downloaded and am running a Jenkins and LAMP VM. I have a job in jenkins that takes a PHP project from SVN and then do the following: 1. remove all the web site files from …
Forum archive
We are a Silicon Valley startup looking for a technical cofounder. We are building the Who's Who of Silicon Valley - VCs, angel investors, startups, etc. http://www.lifograph.com …
Forum archive
Help! A couple of days ago I setup a new debian lamp stack with turnkey on an EC2 instance using the default turnkey security group that only allows a few ports. I was examining …
Forum archive
Dear TurnKey-Forum, based upon my first post (Weblink) I've managed to install the TurnKey LAMP Web Stack App upon our server, given a static IP address 193.175.277.120 and …
Forum archive
I'm trying to update TKLamp to get the php-snmp modules, among other things. This is a VM running in Workstation 10, with a bridge network and http/ftp/http_proxy set to my local …
Forum archive
Hello everyone, I just discovered Turnkey today and I am hoping to learn more. I host a few Wordpress sites currently on Windows. I've been wanting to switch to Linux but I don't …
Forum archive
I though I would add a second CPU to the LAMP machine ( Dual Xeon e5405 / 2Ghz / 12mb ) but after installing the second CPU the machine wont boot - it hangs on the following line …
Forum archive
I have inherited a very large php application that creates and caches files based on the contents of various config files. These cached files are being created with owner and …
Forum archive
I'am a windows 7 user with medium understanding, turnkey lamp control panel has taken over as my default homepage in IE and I cannot change it. I have no clue how this happened …
Forum archive
Hello, Just went through fresh intsall using Hyper-V, no issues there, but after network/root pw/etc configurations, i'm faced with cli only. I thought that the LAMP stack had a …
Forum archive
1) when is the new turnkeylinux (v 14?) to be expected? 2) I used the docker turnkeylinux and it is great, but I see that every image (lamp, redmine, joomla) is build from another …
Forum archive
Hi, I am using the docker appliances. I want to try "tklbam-init --solo" to backup my appliance but I get some problems The release notes state that: - The --force-profile option …
Forum archive
Longtime user of the tunkey lamp appliances.. wanted to post some help for anyone who wants to test out upgrading php 5.2 to php 5.4 on turnkey-lamp-11.1-lucid-x86: You can just …
Forum archive
I just installed a new turnkey LAMP server, and everything seems to be working great. However the Control Panel page comes up whenever I try to browse to my domain, no matter what …
Forum archive
My server is clearly affected by the heartbleed bug (basic LAMP appliance) but I see no security changes at all. How do I fix this since the fixes are the responsibility of …
Forum archive
Hi guys, I didn't want to flag this as a bug in the issue tracker at this time because I was initially wondering if anyone had TKLBAM hanging problems before on initial backup …
Forum archive
Hi, I have a couple of really large mysql dbs and my root partition runs out of space every time tklbam runs a backup. Can I change the location of the TKLBAM cache or is my only …
Forum archive
Hello! Is anyone working on creating a LAMP using the MariaDB as the database? Please advice. Cheers, ///peo Replies (1) I doubt we will see a TKL LAMP with MariaDB until Jessie …
Forum archive
I already have a LAMP Server being used for my intranet site. I would also like to move our messaging in-house but I'm wondering if PHPlist and LAMP will co-exist without fighting …
Forum archive
Hello! I have virtualized 32 TKL LAMP servers that I would like to monitor using the excellent Observium tool. Is there anything I need to do to each LAMP before it can be found …
Forum archive
Hi, I am working on my ZurmoCRM porting project. I spend a lot of time to look for where are these configuration, executable, modules, log, and etc. They're different from my …
Forum archive
OK so in the past I've done backups/restores between different Hub accounts and used TKLBAM-INIT etc but, can I do this and how... I created an AMI (original Turnkey Debian 13 …
Forum archive
I'm having a bit of a problem with my LAMP setup. 18 months ago i installed VMWare virtual machine on my windows PC, I then installed the turn key LAMP image. This allowed me to …
Forum archive
Hi all, I'm using the LAMP stack provided for AWS, which is on Debian 6. By default, you ssh into the server with root access. I find this a bit dangerous, as it's possible to …
Forum archive
First, I wish to say how terrific the Turnkey Linux is. I am running a number of LAMP stacks dating back several years. These have been operating flawlessly. I am considering …
Forum archive
Hi everyone. I'm running the Turnkey LAMP appliance version 12.1 (it needs to be 32-bit since my development machine is still running Windows XP). Most of the time the appliance …
Forum archive
Hi Guys, I am installing a beta of Akeneo on a VirtualBox installation of LAMP Stack. I have installed everything as instructed but get nothing when I navigate to the virtual host …
Forum archive
I had a perfectly running lamp stack VM on my own ESXi server, this stack was set to backup to S3. Since i'm in between servers i thought I'd get my feet wet with tklbam Ec2. I …
Forum archive
Hi all, im having so much trouble trying to sync the date/time of my LAMP appliance. I tried with VBoxManage but didnt work at all how can I have the correct time/date?
Forum archive
New virtual machine - LAMP Stack (version 13), VMWare Player (6.0.1 build-1379776). Static IP (10.20.0.40), behind a firewall. When trying to access Web Shell (10.20.0.40:12320) I …
Forum archive
Hi all, I've been using Turnkey vm for a long and they are just fantastic. Download, deploy and start working on it. Just amazing. My idea now is to have a LAMP server for using …
Forum archive
The latest lamp stack is very nice, however, we are finding it impossible to disable whatever mechanism is caching the web pages. Sadly, this makes it useless as a development …
Forum archive
How to enable imageantialias on my installation? php -r "var_dump(function_exists('imageantialias'));" bool(false) php5 -v PHP 5.3.3-7+squeeze17 with Suhosin-Patch (cli) (built: …
Forum archive
Hi there, I have a problem building new appliance (based on LAMP) and wondering if there are some ways how to debug what is happening, the output which I get when running make is: …
Forum archive
Hello guys, (hope i choose the right place to put this) thought I inform you about my project over at freelancer.com, as its especially inspired by your good work here. …
Forum archive
I am livid right now. After having some issues with a virtual machine running 30+ WordPress installations on a TKL LAMP installation, I concluded my only option was to restore a …
Forum archive
Hi Guys Extreme novice here. We have Turnkey Wordpress 12.1 running as a Hyper-V guest . It has a 20 Gig VHD and 2GB RAM. The wordpress website has been running fine for a month …
Forum archive
I woke up this morning with a stuck server; even after rebooting MySQL wouldn't start. Low and behold, my drive was filled! I checked /var/mail , and the file for root was over 11 …
Forum archive
Unfortunately today I needed the tklbam restore functionality and even more unfortunate it fails during restore producing the following errors: Last full backup date: Fri Sep 6 …
Forum archive
Hi, I have installed lamp on a vmware host. Everytime i reboot or after a certain amount of time 10-15 minutes, I get disconnected from my ssh. Only thing i can do then is reënter …
Forum archive
I have been using turnkey lamp 11.3 and now I want it to host web pages that use JpGraph. However it requires installation of GD library, libdg (to dynamically generate graphs and …
Forum archive
I've tried both on Ubuntu x64 and on Windows x86 computers, with a fresh download of Turnkey Lamp and VMVirtualBox. Same error: after start, it remains like this: Loading Linux …
Forum archive
Yesterday I created Micro Lamp Stack in a hub, but I cant use this instance till now. During server launching I skipped option "Enable Turnkey on Amazon EC2", beacuse I wanted …
Forum archive
Where do we setup the password for Webmin and Webshell? Replies (3) They use the root password... Reply 1 2013-08-15 So you'll need to set one... Thank you for the reply! To Reply …
Forum archive
In the lamp stack PHP 5.3.3 is installed, however my application requires 5.3.8+ Another topic (/forum/general/20130221/php-version-5321) suggested installing from wheezy. Bottom …
Forum archive
Our TKL LAMP VM lost power, and when the server booted up, it came up a initramfs prompt. We've tried to reboot it a couple times since then, and it's the same result. How can I …
Forum archive
My install of TKL LAMP included Webmin 1.590 I did a manual install of Wordpress. (I know there is a pre-built VM for TKL Wordpress but I don't see any reason why I can't run WP …
Forum archive
I just subscribed to a vtiger instance and everything seems to be working but the phpmyadmin interface. when i go to https://54.235.244.136:12322/ just times out. i am not worried …
Forum archive
I've set up a LAMP appliance via the Turnkey Hub on Amazon. I've verfied two addresses using SES, and they've given me production access. The problem is after three straight days …
Forum archive
Hello, Turnkey Community! Background With the intent to create a development-testing server for website development, I imported the Turnkey LAMP virtual appliance into Virtualbox. …
Forum archive
Hi guys, I'm using successfully the Turnkey LAMP appliance for a long time now and it's just great. However, recently I noticed one of my server was short in space. / had 0% free …
Forum archive
Hi Turnkey Heroes :-) I'm extremely excited about RC13 & Sydney datacentre. Very soon I need a solution that uses beanstalk + RDS + s3, with no data stored on server(s). The …
Forum archive
Hello, how to disable directory listing in Turnkey Apache server ? httpd.conf in /etc/apache2 is empty so I have no idea how to fix. There's a way to disable listing using webmin …
Forum archive
I am having trouble with FTP on Wordpress with Turnkey: I cannot update Wordpress or install new themes. It seems to boil down to FTP. I just cannot get it working. I have read: …
Forum archive
I have installed VSFTP on a Lamp Stack instance, the ftp server is up and running, configured but the server will not allow ftp connections through port 21. I have attempted to …
Forum archive
Hello, there's a way to offile update packages/module ? Unfortunately I have a virtual production machine behind a proxy that not permit the automatic download of updates, there's …
Forum archive
I'm very excited about TKL Core 13 RC and I was wondering is there a basic LAMP patch I could apply to it? Replies (1) No sorry there isn't Reply 1 2013-04-05 And there …
Forum archive
I was wondering if a TRUE FTP can be implimented in your next release of Turnkey linux LAMP stack, Wordpress does not support SFTP, and so I cannot auto install plugins and …
Forum archive
Hi guys, I'm running a LAMP stack on Amazon in a micro instance. All files is installed and LAMP is running great. I'm trying to install Wordpress and I just can't get it to run. …
Forum archive
Hi everyone, I've just successfully set up my first Amazon EC2 turnkey LAMP server after running my on VM LAMP for several years (thanks for the *great* product)! On my own …
Forum archive
I have run a vBulletin forum on a shared host for a number of years. Several years ago I also assumed responsibility for a community group's web site hosted on IIS. That site is …
Forum archive
I think that it is perfectly possible that one can install a minimal system with debootstrap, install tklpatch on it, and then apply a patch that builds TKLCore. Is there such a …
Forum archive
Hi. I tried to add the russian locale to TurnKey LAMP Stack. I found some topics about adding locales on this forum, but none of those solutions work for me. Eventually I did the …
Forum archive
Hi all, I have the LAMP stack running fir about half a year now and it's becoming less and less stable with one/some/all of the following symptoms : - SSH sessions from other …
Forum archive
I am fairly new to Turnkey and I have one question. How do I get apache to stop replacing the Internet name www.mysite.com with the IP address. I thought I could modify the …
Forum archive
I have edited the /etc/apache2/default file to the following. I install SSL and everything seems fine in Chrome & Firefox and when checked against …
Forum archive
I just expanded my /dev/mapper/turnkey-root to 30GB earlier today from 1GB, and I thought that it would be overkill and I would have plenty of space to grow. I was wrong. Within 6 …
Forum archive
Hi guys I need some expert advise regarding best solutions / practices for small office file management. There are a number of issues I would like to solve: Central file location …
Forum archive
If you are using CloudFlare's fantastic free CDN service, you might want to preserve the IP addresses of vistors to your site. I needed this so that I could use my .htaccess allow …
Forum archive
Phreeze (http://verysimple.com/products/phreeze/ and http://www.phreeze.com/) is a cool looking php based LAMP framework and App generator that incorporates Backbone.js and …
Forum archive
I had 2 small LAMP instances running on TKL. I also have several websites on each. Once day, one of my customers said they couldn't reach their website. Lo and behold, one …
Forum archive
Hello, everyone. Php developers might have already heard of a relatively new framework which is becoming quite popular. Many CodeIgniter/Kohana developers are actually switching …
Forum archive
Of course a long holiday weekend and a client project due make for perfect timing for a server crash and a good test of my computer problem solving skills, patience, and TKLBAM …
Forum archive
I would like to make a security suggestion to the excelent turkey team.. I advise the following security settings. In the httpd.conf file, making the following entry default upon …
Forum archive
Hello, I am using the Fileserver, TurnKey Linux 12.0 / Debian 6.0.5 Squeeze version. I have installed mysql-server on this appliance which runs happily. Due to space constraints …
Forum archive
Sorry in advance if this is a dumb question. The main reason I am trying to use Turnkey is I really don't know much about Linux. I saw an update available to webmin when I logged …
Forum archive
Hi, I am a student and I need to load the database tables with data scraped from html websites. Could someone please inform me on how I can connect to the Mysql on Virtual box? I …
Forum archive
Hi I have searched but not seen related answer. While gone traveling for 3 months my AWS account was blocked for non-payment. Paid up and now reinstated the account. But tklbam …
Forum archive
I misremembered. I thought there was a network monitoring solution in the huge 12.0 appliance library. I'm sorry if I'm missing it. I've been looking for something to monitor and …
Forum archive
I'm running the latest LAMP stack on Amazon EC2. I installed the time module in Webmin. But when I go there it says "hwclock failed" on the main tab, and if I switch to the Change …
Forum archive
Hi, I am a newbie with ZERO tech skills when it comes to computer and code! I recently took an old Dell desktop tower and loaded Ubuntu 12.04 on it and installed the LAMP server. …
Forum archive
Hi, I new user of TKL an i have instaled the LAMP appliance (Jul - 2012), after install i set the root password for easy one: pass=root (user=root), and i try to connect to webmin …
Forum archive
Hi, I'm really new to turnkey and I'm starting to set up a small project in the lamp virtual appliance of turnkey 12. My goal is to create a internal web server for a small …
Forum archive
Turnkey 12.0 / Debian 6.0.5 Accidentally overwrote the index.php that Turnkey uses to allow access to the web shell, phpmyadmin, etc. Is there a place to nab that file and drop it …
Forum archive
I am trying to get Magento appliance up and running but am having difficutly. I was not able to ping either host -> guest or guest -> host in host only adapter mode. I …
Forum archive
Hello, I just tried migrating a couple LAMP VMs from TLK 11 to 12. In both cases I used TLKBAM to backup the v11 machines and then restored on the new v12 machines. The …
Forum archive
Hi I've been looking for information on the LAMPStack regarding setting up an actual site with it but I can only seem to find the initial installation but nothing beyond. I …
Forum archive
Impossible to upgrade fresh installation of Lamp Web Stack (MySQL) Setting up ntpdate (1:4.2.4p8+dfsg-1ubuntu2.1) ... Setting up xkb-data (1.8-1ubuntu8.1~10.04.1) ... Setting up …
Forum archive
Hello, im a new member of turnkey. Here is the screen shot i will try to explain what is happening. When i login using shell in a box on the browser or ssh there is no problem …
Forum archive
Hi , I am a newbie with TKL . I have downloaded the TKL LAMP appliance and managed to get it running on VirtualBox OSE. I have updated the TKL install . I have tried to install …
Forum archive
Hello, world! Background: We've had a Moodle Appliance running happily for quite some time. Other machines (virtual and physical) sitting in the DMZ appear to be working fine. A …
Forum archive
Hello, I'm trying to use Turnkey LAMP VM to create my web development environment. I've set up the VM, and created the virtual host, but when I go to the page on my host machine, …
Forum archive
At 12000 volumes, calibre starts becoming difficult to manage. I began looking for alternatives for serving e-text and spotted MIDAS. MIDAS is a collection of server, client, and …
Forum archive
Hi All, I installed the lamp appliance. I notice that the time stamp in the postfix logs are off by 4 hours. Advice from other forums was to copy /etc/localtime to …
Forum archive
I need a sensibility/reality check on an idea I'm hatching... feel free to comment good, bad or ugly. I am a Race Director for a series of local bicycle races. We have a …
Forum archive
On my host (windows 7), I updated my VMware Player to version 4.0.3 (http://www.vmware.com/support/player40/doc/releasenotes_player403.html). I have a few Turnkey products. Do I …
Forum archive
I've set up a LAMP server that is designed to host two websites. This LAMP server is one of two computers that is connected to a router in my home. The other computer (which is …
Forum archive
Hello guys, I need to use Amazon SES services, so i must set up DKIM for all outgoing e-mails. If my wordpress install uses smtp to send outgoing e-mail, do you guys have any …
Forum archive
Hi All, is there a way to enable webdav via webmin? I found an option to activate the modules but none to configure the virtual hosts. Or can you tell me what apache config file …
Forum archive
Hello to all, I'm not very expert about Apache server configuration, but I'm pretty able to do almost every basic configuration on the web server. Anyhow, I can't find out how to …
Forum archive
Hi all I have read the section on how to backup locally using tklbam-backup --address file:///mnt/otherdisk/tklbam/backup But unfortunately I have a windows machine at present ( …
Forum archive
Hi, I just installed Turnkey Linux Lamp Stack in VirtualBox. It starts, I can set my password and everything but as I try to access the services (for example Webmin) nothing …
Forum archive
Hi all, I would like your oppinions/experiences Which is better - a backup or a snapshot ? (and on an amazon server - which is cheaper) Traditionally I would go with a backup - …
Forum archive
HI all I have a functional lamp deployment running using amazon ec2/ebs and elastic IP ( I have a domain name and have redirected it to the amazon ip) It all runs smoothly, except …
Forum archive
Hello All, I am trying to add an existing ProjectPier installation to the WordPress VM. I am aware there is an additional turnkey VM for PP, however i would like to have it all on …
Forum archive
So on the description for LAMP stack it says "SSL support out of the box." So I setup up a micro instance and as soon as it was ready I navigated to https://www.ave2.tklapp.com/ …
Forum archive
uHi: I'm part of development team of TestLink (www.teamst.org), and obviously I think that a TestLink TurnKey Appliance will be a good thing to have. I've read you are lot of work …
Forum archive
Been a long time doing it but set up a wordpress multisite on turnkey lamp. The multisite has 2 subdomains. I have 2 addon domains mapped to the 2 subdomains of main site. …
Forum archive
I'm running an apache webserve on your LAMP server, Turnkey LAMP 11.1. I'm using TLKBAM and I've successfully recovered to a fresh install of LAMP 11.1 without any issues in the …
Forum archive
Hello, I have my LAMP stack running on Oracle's VirtualBox. I followed the instructions here: http://doxfer.com/Webmin/ApacheWebserver#Creating_a_new_virtual_host to setup my …
Forum archive
When i restore a back up from my cloud for some reason it does not back up half of my mysql database. below is a print screen only like 6 tables where backed, the back up before …
Forum archive
Hi I was wondering if it is possible to combine lamp, doamin controllerm, zimbre, gallery packages into one virtual appliances. Is so can someone give instructions on how to do so …
Forum archive
I confess to an error of judgement - in that I resized my Redmine appliance down to 8Gb - but since redmine itself only using 500Mb of data I thought that would be OK Trouble is …
Forum archive
Hi btw, I really love tkl. I have installed Lamp and Wordpress Appliances on two seperate KVM vps's, and all seems to be working Cron-apt has run and is sceduled to run. I have …
Forum archive
Hi all, first, I'm very new to this forum and I have tried to search but nothing seemed to fit. I've been out of the linux world for a while (I have been running a debian file …
Forum archive
Hope someone can answer this question. It looks like its something easy to fix - but I cannot fix it on my end. Basically, I have two back ups in my backup pages on the hub that …
Forum archive
Newbie question. I just brough up a vanilla local instance of the LAMP appliance. I'm able to login to webmin, and was also able to setup an VSFTPD by using Shell in a Box. I've …
Forum archive
Hello all, I have recently installed a new virtaul machine using the TurnKey Linux LAMP appliance. The setup was successful but I am having trouble creating virtual hosts. I …
Forum archive
I installed Turnkey LAMP 11.3 in Virtualbox without errors or hicups. I have set aside a smal fanless via c7 fanless machine for it, once i learn how to configure it properly. …
Forum archive
We are having a problem with our TKL LAMP VM, the issue is that any SFTP transfers start out extremely slow, often timing out, but then after 4-8MB have been transferred it will …
Forum archive
Hi This may have been asked before. I am trying to install Tracks and ProjectPier on same appliance. Is this possible? Please let me know if there is a TKLPatch available to do …
Forum archive
I want to add some websites to my Turnkey lamp appliance so I made a file for each in /etc/apache2/sites-available containing NameVirtualHost and ServerNames that I set up with …
Forum archive
Feeling kinda dumb here. I have a fresh install of LAMP in a Virtual Box machine. I am a Linux newbie, so I don't know much about what I'm doing, but I can usually figure stuff …
Forum archive
Drupal 7.0 was officially released on Jan 5, 2011, yet there is still no Ubuntu package available. There is a Debian package available for Sid, but attempts to incorporate it into …
Forum archive
I have a LAMP stack running on a dedicated server at work. I made a couple of stupid mistakes earlier today and would like to restore the server back to the last backup that was …
Forum archive
I've created a TurnKey Hub server with the LAMP stack image (and it's been working perfectly). However, I would like to open port 3306 on the server (the MySQL port) so that I can …
Forum archive
First, I'm embarassingly noviced with Linux, so please accept the ignorant question. I'm running LAMP on Proxmox VE. I saw a new version of Turnkey came out today and thought, …
Forum archive
Hi, I want a little turnkey server upstairs, but there is no LAN-connection. Could I use WiFi? Greets, pity123 Replies (3) Theoretically it could still be done Reply 1 2011-12-04 …
Forum archive
Hi there! I've started Turnkey Lamp version, config everything. I go in Webmin. Then I've created 2 different "no-ip.org" address (example1.no-ip.org and example2.no-ip.org) …
Forum archive
I am running a LAMP server.. It runs fine, including PHP connecting to my database. i wrote some 'custom' code and the php code can connect to the database fine and display the …
Forum archive
I just recently installed the LAMP version of Turnkey. The issue I'm having is whenever a normal user logs into the file manager via Webmin and extracts a compressed file, the …
Forum archive
Ok, i was going to write some code so i boot up the symfony appliance just like always but when i started to execute some code to the database i got "Mysqli statement execute …
Forum archive
I setup a LAMP instance with daily backups. Yesterday I installed some PEAR modules and then decided I didnt really want them. I did a restore to a version before PEAR was …
Forum archive
Hello, On January I made a Windows-small server subscription in Amazon and I also purchased a (Windows small) reserved instance. Six months later I got from Turnkey a lamp server …
Forum archive
OK so I've got a configured Turnkey machine image I used to demo to a customer. Now the customer wants to go live with it but move it or copy it rather under their own AWS account …
Forum archive
Hi all, I was hoping one of you would be able to point me in the right direction on a small challenge i'm facing. On my Debian host, i'm running 2 Turnkey machines in Virtualbox …
Forum archive
I'm jumping in to the deep end here, and hope someone can provide step-by-step instructions for a novice. Used VM and got everything to work nicely using Turnkey Lamp and Joomla! …
Forum archive
Hello to everybody! I'd need some help with my freshly installed Turnkey LAMP Appliance. I need to use the server for just one single website which will need SSL to go …
Forum archive
Hi, A couple of our teachers want to set up their own web sites to teach the pupils web design . I have installed the Turnkey lamp appliance and everything is working fine. I am …
Forum archive
Hi all Newbie questions, first time run Turnkey Linux via VMware ESXi. Not sure if this will be sufficient for anyone to point me in the right direction; Welcome to Lamp, TurnKey …
Forum archive
Hello, I have configured Zabbix to run on Turnkey Ubuntu 10.04 and everything was fine util I updated an apache software update. I lost my Zabbix web interface. I was able to get …
Forum archive
Do you know if LAMP Stack appliance, based on Ubuntu 8, can be deployed on ESX5 server? Is the latest TurnKey LAMP Server compatible with ESX5? Thank's. Marco Replies (2) The …
Forum archive
I am trying to configure a VM server starting with the LAMP Stack appliance version 11.2. This is running on top of VirtualBox 4.1.2 on a Mac. One of my needs is to install the …
Forum archive
I am trying to configure a VM server starting with the LAMP Stack appliance version 11.2. This is running on top of VirtualBox 4.1.2 on a Mac. One of my needs is to install the …
Forum archive
i have problems with mysql password on the turnkey linux images. AMI: turnkey-wordpress-11.2-lucid-x86.ebs (ami-97b077fe) here is the prompt. mysql -u root -p Enter password: …
Forum archive
Hello, have access only via SSH what to do next? Replies (3) I don't quite understand? Reply 1 2011-08-31 The easiest way to launch TKL appliances to AWS is to use the Hub …
Forum archive
Hi, I have run into a minor problem installing Wordpress to the LAMP app. Right near the beginning Wordpress will guide you through the creation of the config file if you haven't …
Forum archive
Hello, After installing LAMP into virtualbox on ubuntu 64 bit, and trying to start the file manager, using latest version of mozilla browser, i get a "failed to get language list …
Forum archive
Greetings everyone, trying to teach myself some web development, I've installed the LAMP stack in Virtual Box. It seems to work, as I can browse to the front page from the host …
Forum archive
Hi, Have installed a Turnkey LAMP appliance and new server up and running with our internal customer system written in PHP using MySQL in no time. However, all of our screens that …
Forum archive
I've got an automatic PCI scan hitting my server and it is failing because there are vulnerabilities in Apache Web Server 2.2.18 and below, so it requires an upgrade to 2.2.19. …
Forum archive
I'm confused on how to access the apache and mysql settings in the lamp stack. I installed lamp stack from the iso to a VM on ESXI. I can access the WebShell command line console …
Forum archive
"FOG is a free open-source cloning/imaging solution/rescue suite. A alt. solution used to image Windows XP, Vista PCs using PXE, PartImage, and a Web GUI to tie it together. …
Forum archive
Chamilo is a promising course management system that is extraordinarily flexible and extensible. It incorporates web 2.0 features that Moodle manages to stretch to incorporate. …
Forum archive
Sorry because my bad english ,-) But it is not possibile for me to install that all. I trie´d in VM-Ware and virtual Box but everytimes the installation is hangingb up in step : …
Forum archive
Installed TurnKey LAMP server; allowed all updates. LAMP server is at 192.168.48.67. Created a directory (/var/www/Stan-and-Jeanne.com/pictures). I have a share on a Netgear …
Forum archive
I've successfully installed a LAMP appliance on VMWare, but when backing up and restoring, the Mysql is not operational on either EC2 restores or a restore to a blank Turnkey LAMP …
Forum archive
Hello- I have succesfully installed LAMP (new user) and created a name based virtual server. Our webmaster has uploaded to that site's folder and its working well- his website is …
Forum archive
I recently updated my development Turnkey Lamp to continue my development. But now whenever there is an error in my php script instead of going through my error handlers helping …
Forum archive
Hello, I've been running the TK Lamp appliance on VirtualBox for the past month or so and I was quite happy with it, until a few days ago when I noticed the following: The …
Forum archive
Hi, I've attempted to install Drupal7 atop LAMP but I'm have some issues with Clean URLs (among other things.) When might the Turnkey Drupal Appliance be revved to 7? That would …
Forum archive
Hi All :-) I am trying to enable caching on my site and the script i use supports xcache which i understand is built directly into the current LAMP build. However the script asks …
Forum archive
I installed mod_fcgid and mod_php5-cgi by these instructions (http://phphints.wordpress.com/2009/01/10/improving-php-performance-with-...). Now phpMyAdmin doesn't work: error 403 …
Forum archive
Hi I downloaded Turnkey LAMP appliance and added wordpress via ftp explorer within webmin. But when I'm trying to add new themes/plugins etc to wordpress it doesnot accept the …
Forum archive
Lamp Stack - MySQL - TKLBAM Hi there, I'd like to start with an apology. I'm sorry for being late to the party! I've only just discovered TurnKey, and I am so excited and …
Forum archive
hi ppl, last nite, im install a new turnkey lamp and doing a full system-upgrade #apt-get dist-upgrade. after that.. while setting up udev, it take too long and no respond after …
Forum archive
I am using the following setup to test various sites on different computers using a single external disk. This allows me to not only ferry the data around (10 GB) between …
Forum archive
Hi all, I'm a Linux newbie, so apologies in advance if this is (or should be!) obvious - but thought I'd share this to help other newbies! :D I set up a Wordpress appliance (11RC …
Forum archive
Hi.. I have installed linux turnkey lamp server on a spare computer on my home network. I can access the config and admin web interface. My question is how do I go about setting …
Forum archive
I've installed the LAMP stack and everything seems to be working correctly except the Apache server. I can access Shell In A Box, PHPMyAdmin, and Webmin. However, Apache is not …
Forum archive
Does anyone have any pointers on how to set up AWstats correctly on Turnkey LAMP? I have tried following various guides but can never complete the config of AWStats. Replies (5) I …
Forum archive
Hi, I'm a newbie to Turnkey and have just set up LAMP as a virtual development environment for a website I support. Everything works great, except that the website uses cgi …
Forum archive
I wanted to know if the LAMP 'turnkey' includes the Zend Optimizer (version 3.0, 3.3 or greater) on the most recent version. Could someone please let me know if this is true? …
Forum archive
Hi, My 1st test with turnkey. I try install dolibarr on lamp. IP 192.168.0.87 less /etc/hosts 127.0.0.1 localhost 127.0.1.1 lamp less /etc/apache2/sites-available/dolibarr …
Forum archive
One of my projects requires my app to talk to an MS SQL service from time to time. How does one setup the module to allow this as I currently get: Call to undefined function …