TURNKEYGNU / LINUX
English

Forum archive

Webmin after reinstall

Support

Hi, I reinstalled webmin in a attemp to upgrade it. did´t work trough..

But now I have a problem with the stunnel4 and webmin, when I try to connact to https://mydomain.com:12321 I get there´s no page. what settings do I need to change in the webmin config´s to let it work probelly with stunnel4 again?

- S Teelen

Replies (6)

Is Stunnel configured properly?

Reply 1
Make sure that your stunnel config (/etc/stunnel/stunnel.conf) includes the following:
[webmin]
accept  = 12321
connect = 127.0.0.1:10000
And if it doesn't, add it and restart stunnel.

If you have done that and it still doesn't work, I've run out of ideas... To summarise, these are the things you need for it to work:

  • Webmin running
    • listening on localhost port 10000
    • no SSL/TLS - just plain HTTP
  • Stunnel running
    • listening on port 12321 (HTTPS)
    • allowing connections from anywhere
    • forwarding traffic to localhost port 10000
  • Explicitly accessing Webmin via https://IP_OR_FQDN:12321 from web browser that has network access to the VM. If you are using the default self-signed certificate, you may need to click through a browser warning/error message regarding that.

    So if you can confirm network access between your browser and the server and the above conditions have been met, there is no reason I am aware of for why it shouldn't work...

    • nvm

    Reply 2

    nvm, I installed turnkey on virtualhost and copied the config. but it did´t work... and everything is runniong fine without errors...

    config file

    Reply 3

    I edited the config with the settings you said, and checked logs and errors but noting, could you send the entire webmin config? then I will paste it all in.

    Not 100% sure, but I think that these are the important ones

    Reply 4
    I'm not 100% sure what are the most important ones, but I've pulled the ones that look like they may be important from a working Webmin config (/etc/webmin/miniserv.conf)
    port=10000
ssl=
no_ssl2=1
no_ssl3=1
no_tls1=1
no_tls1_1=1
listen=10000
bind=127.0.0.1
sockets=
no_resolv_myname=0
ipv6=0

    The I suggest that you restart both Webmin and Stunnel, and double check that they are indeed both running:

    service webmin restart
service stunnel4 restart
service webmin status
service stunnel4 status
    Additionally, perhaps there may be some useful info in he default webmin logs?: /var/webmin/miniserv.log & /var/webmin/miniserv.error

    localhost

    Reply 5

    how do I set webmin on localhost only? i set ssl to 0 in the webkin miniserv.conf, and the port is 10000. stunnel is running and webmin aswel. but i cant connect to https://mydomain.com:12321

    It depends on why it's not working...

    Reply 6
    In our default config (as of v14.0+) Webmin listens on it's default port (10000) via HTTP but only on localhost. Stunnel links external port 12321 (HTTPS) to internal port 1000 (HTTP).

    So things that come to mind that may be wrong are:

  • Webmin not running
  • stunnel not running
  • Webmin port changed
  • Webmin using SSL/HTTPS [stunnel can't connect]

    Some useful tools and commands:

  • netstat -l [lists listening ports]
  • service SERVICENAME status [status of SERVICENAME; [webmin|stunnel4]]
  • cat /etc/stunnel/stunnel.conf [displays stunnel config file]
  • COMMAND | grep KEYWORD [searches the output of COMMAND for lines that contain KEYWORD]
  • grep KEYWORD /PATH/TO/FILE [search FILE for lines which contain KEYWORD]