grassu's picture

Hi,

is there any howto how to setup Turnkey (TRAC Appliance) to use only IPv6? The appliance is installed on a xenserver-6.

I already tried to modify the /etc/network/interfaces manualy but it doesn't work as expected.

I modified the file like described here (http://wiki.hetzner.de/index.php/Netzkonfiguration_Debian#Root-Server_2)

## /etc/network/interfaces Beispiel Hetzner Rootserver
# Loopback-Adapter
auto lo
iface lo inet loopback
#
# IPv6 LAN
auto eth0
iface eth0 inet6 static
  # Haupt-IPv6-Adresse des Servers
  address 2a01:4f8:61:20e1::2
  netmask 64
  # Host-Route, da das Gateway ausserhalb des eigenen /64 Blocks liegt
  up ip -6 route add 2a01:4f8:61:20e0::1 dev eth0
  # Host-Route, da das Gateway ausserhalb des eigenen /64 Blocks liegt
  down ip -6 route del 2a01:4f8:61:20e0::1 dev eth0
  # Default Route
  up ip -6 route add default via 2a01:4f8:61:20e0::1 dev eth0
  down ip -6 route del default via 2a01:4f8:61:20e0::1 dev eth0

Every time I reboot, turnkey want's to configure the network.

Any help appreciated.

grassu

Forum: 
Tags: 
grassu's picture

Thanks. I get it running now with ipv4.

Add new comment