Name

Name

teakfurniture

Personal details

Short Bio

When installing ceramic tile supplies have occasionally broken or the wrong cut. This unused tiles are often discarded and becomes waste. In fact, there is a way teak furniture to conjure up the ceramic pieces to be a facade. Remember, one of the principles of green design is to utilize used goods, in order to be useful. As much as possible not to have wasted material.

 

Sortirlah ceramic shards, how you'd like to use and separate from an ugly ceramic shards. Choose a piece of pottery that the shape is still good. Ceramics-ceramic-here's what you'll use to coat the walls. How to install the same as usual.

 

Regarding the composition, certainly up to you. Like playing the puzzle, you can put up a large shard of great wall-side down then graded the less to the top, or vice versa. Or it could be random in size, but in groups based on color.

 

There is also another way, to make it look more presentable. If the problem is the size, look at the ceramic shards tipsnya size is very small. Then you may be a great ceramic large-size shards to be small. After that install one by one. Good luck!

 

The tree is a green property elements that are very important. Trees provide a supply of fresh air (oxygen) and absorbs carbon dioxide effectively. Trees planted around it we can also provide shade and protection from the attacks of the weather such as rain, sunlight, wind, and so on. For the rider of the vehicle and other road users, the streets will also be cooler and the reflection of the sunlight which causes glare thanks to trees.

 

But what would happen if the rainy season coming? There is always the fear that planting trees around our occupancy would harm because it can be uprooted. But this fear is not always true because of the fact we could anticipate.

 

For those of you who have surrounded the House with many trees, don't worry. Here are 3 ways you can do to trim the tree:

 

1. Trim the branches with selective We simply cut some branches evenly in all parts of the tree. This is done so that the foliage can be reduced. With leaves and branches that are fewer, the light and the air will be more freely through so that your residence is not too dark.

 

To be aware of is that you should avoid cutting more than a quarter of the branches of life thrown in one time. Give the break to cut the branch so that the teak furniture tree doesn't become depressed (stress) and prevent the occurrence of epikormik in the number of shoots that are not desired.

 

2. Trim the bottom branches Bottom Bough branch and Pangkaslah. Doing so will open enough room for people to take shelter or walking under the tree. This method will also give you a cleaner Rod if it will be cut down and used as furniture.

 

To be identified is try to leave at least part of the tree. So a tree with a height of 9 feet, will stay at the corolla should ideally be as high as 6 meters (by removing the bottom Bough branch and as high as 3 meters).

 

3. Trim the top branches This method is often done to prevent tersangkutnya the highest Bough with electrical wiring. How to cut out also not indiscriminate because it could shut down the branch. For that branch that grows sideways to be made with a minimum size? the main branch of the menempelnya.

 

The risk of stress that larger trees to be covered this way, especially for the type of tree that grows in the shape of limas/pyramid. So, do not slash the trees around your House just because of fear of endangering lives and property. Pangkaslah trees on a regular basis so that the possibility of falling can be minimised.

History

Member for

11 years 2 months