We're using the Gitlab 14.1 ISO and it is working well, however we are trying to set up Port Address Translation to allow us to access it externally via port 8081 instead of 80. The PAT is set up and working, however when it hits the site, it pulls the port out of the url, i.e. we go to
I'm new here , and i install your wordpress virtual mashine and i made website , so i now i need export data files from it . and i dont know how , i thnik that i should connect to ssh server but i dont know what's my password :O can someone help me
I did this years ago but did not document how I did it, and unfortunately my searching hasn't come up with the answer even though I know I must have read it here (although the methodology may have changed since the time I did it).
What I need to do is add port 8080 to the list of ports Webmin listens to, and port 8008 to the ports ShellInABox listens to. I need to do this to get around some firewall rules at my workplace.
I have various Cisco devices ( catalyst switches, ios routers, ios-xe, etc), but none of them are showing any memory usage details in observium. I was surprised by this as observium did a remarkable job of recognizing and displaying information for things that most snmp tools do not, Qnap for example. It does recognize my Cisco devices and reports back on just about everything, but memory. Other tools I tried, such as Manageengine, PRTG, etc reported the memory with no issue. So, I'm skeptical that there is anything wrong with my snmp setup.
I'm hoping someone has some experience with this and can lend their expertise.
I have set up the first domain controller in our new forest, and it is working great. I would like to add another DC for fault tolerance/load balancing. When I spin up another TKL Samba4 appliance, it automatically has me go thru the initial setup, which creates another new forest. How would I go about using TKL Samba4 14.1 to add a second DC to an existing forest?
Hi, I reinstalled webmin in a attemp to upgrade it. did´t work trough..
But now I have a problem with the stunnel4 and webmin, when I try to connact to https://mydomain.com:12321 I get there´s no page. what settings do I need to change in the webmin config´s to let it work probelly with stunnel4 again?
