Hi TKL folks,

I've recently discovered your tklapp.com dynamic DNS and decided to switch out my Elastic IP for talentware-trac.tklapp.com for one of my instances running through the Hub.

First issue was that when I released the Elastic IP, Amazon didn't assign me another public IP address. Solved this by rebooting the instance from SSH.

Then I installed the hubdns package, ran hubdns-init and hubdns-update, which returned successfully but did nothing (i.e., DNS didn't resolve).

I am in the process of setting up a server running the file server and mediawiki appliances, for use in a small research laboratory.  I am somewhat familiar with users in linux, but am having trouble figuring out the best way to achieve the access control I desire.

The file server itself consists of the server (obviously) attached to rack-mounted external drives (essentially 4-drive units with hardware-RAID; appears as a single external dive when plugged into the server).  These drives are mounted in /media

Having a little trouble logging into my new Turnkey Wordpress appliance. Just the Wordpress page.

I can log in everywhere else, but this WP thing completely destroys the usefulness of the appliance.

I've changed the password in PHPMyAdmin, and rehashed it - no joy.

Halphalp!

Thanks.

HI, i'm new on tjis forum, and i'm excited to partecipate on discussion and new project with virtualization appliance. I ask you it's possible to mbuild an Appliance with IPCop Firewall UTM on KVM in Proxmox. An image Vmware already exist, but qemu-Kvm-OPenVz is preferred for me. With this old post it's no convenient http://forum.proxmox.com/threads/4944-Install-Ipfire-with-KVM-in-proxmox but whit this:

Hey everyone,

Forgive me if there's already an existing post explaining all of this, but I'm having some trouble configuring a network-enabled WordPress site.

Here's the steps I took:

Feeling kinda dumb here.  I have a fresh install of LAMP in a Virtual Box machine.  I am a Linux newbie, so I don't know much about what I'm doing, but I can usually figure stuff out eventually.  But I can't seem to access the Webmin.  I've attached a screenshot of the configuration console screen that lists the address links, but how do I get to them?  Hitting TAB or the arrow keys doesn't get me anywhere.  But I can go to advanced menu or toggle back and forth to the command prompt just fine.

Hello, i succesfully downloaded a magento virtual appliance, wich i modified with this tutorial (sorry it's a french one, but the command lines do not change)

configuration turnkey linux magento

But after a few boots, or try to export zip upload on dedicate server and download in an other place, i have this problem:

udevd[329]: can not read '/etc/udev/rules.d/70-persistent-net.rules'

Hi All,

I have installed Revision Control Appliance few months ago and it works well. Recently I encounter a problem, when I try to use Blame/Diff in WebSVN, it shows "sh: cannot create : Directory nonexistent."

Project -> click any version -> each file has "Blame", "Diff", "Log", when I click Blame or Diff, it shows above error message.

Is there any idea of this issue?

The Revision Control Appliance version should be 11.2.

Sorry for my poor English...